I use the mityvac also...make sure you get the engine nice and hot....dont just run it off the hose in the driveway.
Run it up and down the water to get it hot. If it's only warm it's a pain.
Type: Posts; User: JASONZ
Search: Search took 0.01 seconds.
It's fine....it has to be really prolonged cold with highs in the 20s to do damage. 19 overnight is not going to cause a problem.
03-20-2015, 11:35 AM
I think its amazing that you did that without spilling any oil on the boat...
One time i removed the filter and the o-ring stuck to the housing. I screwed in the new filter....now with two oil...
79K for the SC350 is not a great deal.
You gotta knoock 10k off that for a good deal. The boat show sticker prices are super inflated.
Yes - I think a new LSV at 67k is "seems high."
I agree, for 67k, the only boat that gave the LSV a respectable run is the T22 which comes in higher in the low 70s.
The new Mojo looks great and...
I got a chance to see the mastercraft nxt at the boat show this weekend....it looked terrible.
the beam was small and the gunwale was fairly short. the tower looked cheap...and the fit and finish...
12-16-2014, 11:25 AM
I can do the basic maintenance (fluid changes & winterization).
My old '12 OBV never saw the shop for the two years I owned it.
I know a good local mechanic who is certified by...
12-16-2014, 08:45 AM
My SC350 comes with switches for an underwater light with strobe option.
The underwater lights did not come installed with this boat.
From pictures I can see that the underwater light option is 2...
09-02-2014, 12:29 PM
:idea:DIY wind screen that you can build in 10 minutes!20788
Looking for comments from those who get big wakeboarding wakes on the OBV.
Here is the setup that I use and the boat rides very well with that weight:
standard GIII 400X3 bags (L, R, C)
1) I believe part progression on the impeller is: Black -->Yellow-->Green-->Orange.
2) The O-RING fits the Jabsco pump.
I recently had to change out my ballast impeller due to normal wear (even through the green one had no visible wear, the vanes felt loose and it wasnt working well)....I use these frequently dumping...
I recently installed a heater on my outback v and it works really well. If you are thinking about getting a heater you should go for it. Hopefully this write up is useful to you...
I installed a...
06-06-2013, 10:11 AM
The percentage full /empty for the ballast in the digital cruise pro is troublesome (i dont think this is news to anyone here)
Today my center bag emptied completely, yet the display was showing...
Results 1 to 14 of 14