Do any of the newer lsv's use hard tanks? I ask cause I know on the mojo there was great discussion about the check valves with the hard tank it causing the tank not to drain.
Type: Posts; User: rbeckner27
Search: Search took 0.01 seconds.
Yesterday, 12:55 PM
It is no different just the two plugs on the bottom of the block two plugs at the v drive one on the exhaust and the three hoses on the water pump and the connected hose lines laying across the top...
I believe there was some discussion on another thread and there is a bolt and Allen head screw that allow for removal
I haven't tried the noserider but I wonder if it is very similar to the fish though. I would recommend either the bazooka by walker project or red rocket by inland surfer if you could swing it. Me...
04-15-2014, 06:17 AM
I am in agreeance with mike that I am yet to be impressed, but I will say it hasn't had the immediate easy setup and usage that I was maybe inappropriately assuming it would.
I would not recommend the fish as it is rather slow. I personally have the fish and my buddy has a broadcast and we never ride my board.
04-06-2014, 08:40 PM
We got out and did some testing yesterday but we had some issues getting the sacs filled up properly so I believe that was the biggest issue but from what I saw yesterday I am still waiting to be...
How do you get to the actual pumps? I assume they are behind the board at the rear of the boat on the port side in the very back of the ski locker.
Took the boat out today and the right and center bag/tank pumps worked great the left pump just doesn't seem to want to flow water.
I tried filling the bag with the over the side pump and then...
Have to admit I just did it today. I am thinking the rtv approach may work sufficiently.
The 6016 might not have as much strength as the 6061 but that is very dependent on the hardening and temper treatments. To be totally honest I do not think in this application you as the end user...
Correct about the first 2 digits the second 2 refer to the silicon to magnesium proportion and it's ability to form magnesium silicate
I can't recall what the minute differences mean to the end...
I have boatUS, the only thing I thought kinda querky about there policy is they require you to be a boatUS member and they don't tell you about that until you start the policy.
When we bought our...
03-28-2014, 07:23 AM
Mike how are you getting 3k in the rear?
I gotta put mine on too and I was going for exactly what Drew did to match to the moomba chrome lettering
03-26-2014, 10:22 PM
I knew I was setting myself up but I couldn't keep myself from saying double nutted.
03-26-2014, 07:11 PM
Mike did they cut your two through bolts into your rear lockers? Mine were too long so the shop double nutted the bolt to prevent it from damaging my rear sacs. I am contemplating just pulling the...
03-21-2014, 09:45 PM
Got the system installed today. Wasn't able to get any accurate dimensions as I could not get my...
03-17-2014, 06:12 PM
No as I have been told twice by skiers choice that it will void the hull warranty
03-17-2014, 04:25 PM
03-17-2014, 04:23 PM
The is a view from the front as it would go on the boat
View from the top showing the curvature
Your ordering more than one?
Just kidding congrats.
One of moombas ads show it fitting in what looks like a standard garage door. I have a mojo and with a good drop hitch I can fit my mojo under a 7' door. A 8' door would be a piece of cake with the...
03-12-2014, 08:10 PM
I agree 100%
03-12-2014, 06:52 PM
If anyone is interested I might be able to take my mounting plate to work and have them scan the part with our laser scanning CMM to create a 3D model of it for someone looking to make the part...
Results 1 to 25 of 77