I know the guys that did the stereo in that boat......I nick named it "Freddy" because of the headaches the installers and shop have went through to get it where it is today.
I agree way...
Type: Posts; User: Hillbilly
Search: Search took 0.16 seconds.
I use the triangle sac mentioned above. If you dont need the room in the bow it slams the front!!!!
I also have 6 pop bags I use to move around the cabin. And for evening out the boat lead in soft...
I've buried the nose a few times when its been busy out. And a few friends have buried it not paying attention.
I DESPISE powerturners......And only do it when needed
How many of you guys...
I think I will my have boat pulled out of storage tommorrow and check it out...........Tossing around the idea of a New Years day run anyway....lol
I know a few of us had "loose" steering issues. I found what I thought
was a loose part at the tilt steering.
I also looked back at the steering clamp block by the engine. it had quit a bit of...
I also had the sloppy issue......
I think my clamp/block down at the rudder might be sloppy.....But I also found that my wheel had quite a bit of play. I reached under my dash to the bottom of the...
I bought a roll of the thinnest I could find.......Hope it works.....lol
I had removed the set screw it was just on there for so long I think it was a pain to get off.......But I got it!!!!!
After pulling the V drive there is a bunch of room...lol
Made my own gasket...
SUNOFABISCUIT.......Ended up pulling the v-drive......Now does anybody happen to know a model # for a new gasket??? LOL
This quickie job I thought I was going to do has turned into a huge...
I got the nut off this evening then decided to pack it in for the night .......A few more steps and I will be 1/2 way done......lol
Looks like the V drive might be coming out to get my coupler nut off.
Anybody know what part # the gasket is between the v drive and trans? Or can I just use permatex.....
CWB Marius is a great board and if you got the $ a DB9 is very light!!
I've ridden the Marius shape for a long time and love it. The newest shape "11-"13 is loose to Me and it has nice soft...
I'm going to turn the shaft and see if the offset changes any as I turn the shaft and that should tell me right away if it's bent......Maybe it is out of alignment and that is what caused my seal to...
I spent a good couple hours trying to get my prop shaft coupler bolt out and could not get it to loosen?
I was cranking on it both directions and al it was doing was torquing the shaft....When I...
I rode a Monarch a couple times back when they first came out. That board was really nice. It had a lot of pop and was nice and light with pretty soft landings. It was just a bit to small for me...
Didn't he do a roll to revert ?
Anyway looked good....
I know he was at the CIE springride this year at Bass Lake. I wonder if that is where he filmed it?
Great song also....I can live with the...
Mine leaked also and I usually run 1100 lbs in the nose....So I just kept a decent seal of silicone and its been working.
Leaky lights and stupid staples poking everyone in the arm on the observer...
Glad to hear you like the new board !
My buddy didn't make it down from Portland so I didn't get the Vibe/Answer combo....Oh well I have enough boards as it is....lol
I rode 2008 Answers from CWB up until this year. I would get a newer pair every other year of the 2008's Loved those boots.
I recently got a pair of 2011 AA's by CWB and love those also.
The Zues was a higher stiffer binding than the Factions or Answers. And the old shape was a tank for sure!
I have heard that Ronix 1's are just about the best most comfy binding out there ! I...
I think it will be fine for you. I ride a Marius 140 and I'm 6'2 225 so I think you should be good on a 138 Faction.
I was thinking of picking up a Faction 144 for me to play around on but I got a...
A bigger board will land softer. And from what I hear the Faction lands super soft.
A friend of mine who is about 6 ft and about 160 ish rides a 138 DB9. Which is the same shape just Bamboo core...
So do all boatmate trlrs have these kind of hubs? I have an 07 LSV with a boatmate trlr and no clear window, But there is a silver cap but I don't recall an emblem on it? I do remember seeing a screw...
San I have a couple extra. I had to buy some but I don't remember what size they were ?
Just remind me next time we meet up or we need to just make a time and meet at Swabbies for lunch and I can...
you add speed when going with the current? I thought you would add speed when going up river?
I ride the Sacramento river and I always prefer to ride up river, It just seems like the wake is...
Results 1 to 25 of 182