Search:

Is there a way to test if the gauge itself is broken? The gauge used to work intermittently and would then work if you tapped on it. Now it does not move at all. I checked the connections and found a...

I have done this twice. I had to remove the pump from the engine. That was the hard part because it was hard to reach. The broken off part of the bolt came right out. One time I could spin it with...

According to the manual, the hubs should be full. I think I read somewhere that any air in the hubs will get hot and expand, raising the pressure in the hubs.
It is easy to do. Take the tire off,...

I would like to change the rubber pad on my swim platform. I am looking at a Seadek pad. How durable is this stuff. My pad now is just hard rubber. I do not want to change it and then have it get all...

I installed a raw water strainer this summer. I have a 2003 Outback LSV and because of clearances the only way I could fit it in was to install it upside down directly behind the water pick up. It...

The steering has gotten really stiff on my 03 Outback LSV this summer. It gets a little easier as the day goes on. In the 3 years I have owned the boat I have never lubed the rudder. I noticed the...

I recently installed a Perfect Pass Stargazer in my 2003 Outback LSV, and my fuel gauge has not been right since. I do not think the 2 things are related,but I guess anything is possible. The gauges...

Does anyone know where I can find a nose guard for my board? I am new to this and have a Grindwater Mauka with a pointed nose and I don't want to start dinging up the boat. Any reasons to not get...

I bought the racks suggested by Frank Smith. They were shipped promptly and were of pretty good quality. The only problem was that the surf board did not fit. The bigger slot in the rack is not quite...

Get an impeller puller and it will come right out. I use one on my v drive boat where the engine faces the stern and I can't even see the impeller, with no problems. I can get it out in about a...

Thank you for the info. This is exactly what I was looking for.

Anyone out there no of any surf racks out there that will fit the oval tower crossbars like the stock wake racks? Any racks that you particularly like?

Having a fan or dryer is the best cure but I have also found that if you spray everything down with 3M Mildew Blocker it will keep it mildew free. I live in Seattle where it rains all winter. I have...

I noticed the reply about newer impellers coming with an o-ring. Where does it go? I do not see a place where it fits. I use the gasket and throw away the o- ring. Am I leaving something out?

Get the engine serial number and e-mail Indmar. The always have answered my questions promptly.

I would not have a boat without it. Best after market product I have ever bought. The reduced exhaust is nice but the best part is the reduced noise. Can barely hear the engine at idle. At towing...

Why are you going to all of this trouble? Indmar's instructions for winterizing the engine are to drain the block and manifolds and leave the plugs out. I do that plus drain the shower and heater,...

I do not know how much the product you are thinking of putting in costs, but if it is very expensive at all you might consider a Fresh Air Exhaust instead. I installed it last year and it was the...

Maxpower220
Thanks for all of the info. It sounds like my only option is PP as I have a mechanical throttle. I was wondering when I looked at the ZO site why they only showed a wiring harness and no...

Does anybody have any experience with both Perfect Pass and Zero Off? I have a 2003 Outback LSV and am thinking about getting the Perfect Pass Stargazer wakeboard edition. I have also looked at the...

Thanks for the help.

The bolt is broken off in the pump housing. It apparently broke off sometime this past summer. About 3/4 of the threaded end is still in the housing so I have to get the pump off and either get the...

I was winterizing the boat yesterday and found the head of one of the brass bolts to the impeller cover in the bilge. I have a v drive and it is almost all I can do to get the cover off to change the...

The fill hose to the center ballast bag in the ski locker of my 2003 LSV keeps coming off. I have to watch when I fill it and last time out the fitting came off of the bag while boarding and the...

When I ordered my FAE I called them to order it instead of just trusting the charts. They asked me a lot of questions about what boat I had and were excellent to work with, a very friendly small...