Fair do's that is a serious amount of ballast......probably take me a week to get on the plane with that lot and a boat full of people!
Thank you for the explanation, I will check my system at the...
Type: Posts; User: wolfstone
Search: Search took 0.07 seconds.
Yes, the big basement ski locker, see the attached pic giving you an idea of my boat model.
It runs from the fuel tank (deep), right up to the bow of the boat.
Obviously it gets shallow...
So on my Mobius V 2000 i have two hard tanks either side of the engine in the rear, and one ski locker fatsac which i added myself last summer.
I have also added 6 x bags of sand to the bow under...
Perfect Pass contacted but they do not have an adaptor available.
I read a few posts about these gauges, apparently moisture may be to blame.
So, at the weekend, I took a hairdryer and blew hot...
06-28-2013, 03:14 AM
Took cider there to drink (as French cider is merde)
Took wine back
06-27-2013, 10:49 AM
I just returned from towing my Mobius from England to the South of France and back, 2 days of towing each way.
This was my second year of doing it, with no problems.
Last year we had a blow out...
I have a PP Wakeboard Pro mechanical system, but the screen keeps fading, although the system still works.
My friend has given me a display from a DBW system, so the connector is different...
My thoughts exactly, guarantee they forgot to reassemble something, no way they would admit to it though.
I have always serviced mine, and never had a problem (touch wood)....its easy peasy!
I normally run my p.p. at 19.5mph with the tide, or 20.5mph if ballasted and loaded with friends heading into the current.
Freshwater, but we have the highest tidal measurement in the UK.
04-05-2013, 04:58 AM
Meant to add my link some time ago.....
On my youtube channel you can see where we board on the tidal stretch of the River Severn in England.
Here you can see my Moomba Mobius V 2000 (imported...
* * * * *
Note from Kaneboats: I copied Wolfstone's posts that were buried in another thread because I thought many more would like to see the International side of Moomba/Supra riding. Enjoy! ...
03-27-2013, 04:19 AM
The very kind Dennis Backus at UFP informs me they are 7/16 by 20 tpi......
At the rudder end, I completely cover the linkage in grease.
I also turn the wheel so the tube is fully extended, then grease all over,
and then turn the wheel the other way and grease again, ...
I cannot remember if there are any warning signs, but I can tell you that I had to change mine after putting the boat away for winter in October, then trying the steering wheel in March and it was...
03-25-2013, 08:27 AM
Does anyone know what thread and size the brake bleeder screws are on a Boatmate trailer?
They can be found here http://www.pacifictrailers.com/caliper-bleeder-screw-for-UFP-DB35/
but it doesnt...
10-19-2012, 07:33 AM
You USA guys don't know how lucky you are!!!
We pay an average of $10 per gallon for gas........makes me want to cry!
We have had the worst summer in 100 years here in the UK, so no sunshine at...
10-10-2012, 07:33 AM
If you are planning a trip across the water next summer, drop in and have a tow with us.
I have a Moomba Mobius V, ride with a great bunch of boarders at our own club,
You probably want to get any trailer problems resolved before going on any measureable journey.
I towed my Mobius from my club in Gloucester UK, to Gastes, in France (1 hour south of Bordeaux) in...
10-04-2012, 03:12 AM
Sorry, yes, I have a hole running from the front ski locker to the rear engine compartment.
I don't have an actual drain plug in the centre of the boat (like some Mastercrafts).
10-03-2012, 03:05 AM
I only have 1 drain....at the rear of the boat, no centre drain.
The water is stuck in there with no way to escape....I might have a look this weekend....but I don't want to spend days at it.
Yes, that picture is correct....it's the tower mount which has stripped threads....
As it seems they are no longer available, i will have it re-threaded with an insert.
Thanks for the advice.
10-02-2012, 07:19 AM
I have this "trapped water" issue with my Mobius V 2000.
Its been like this for the 5 years that I have owned the boat.
I just look at it as extra ballast...
It does get cold here in the UK...
Can anyone help me identify and source a replacement tower mount for my Mobius V 2000?
The internal thread is stripped on one of the mounts.
Attached pic of the mount.
I stand corrected.........
quote "MPFI does not have a carb" unquote
Then how come i take the flame arrestor off and look down into a carb???
My engine and docs all state MPFI, and Indmar confim.
Results 1 to 25 of 67