I use the triangle sac mentioned above. If you dont need the room in the bow it slams the front!!!!
I also have 6 pop bags I use to move around the cabin. And for evening out the boat lead in soft...
Type: Posts; User: Hillbilly
Search: Search took 0.02 seconds.
I've buried the nose a few times when its been busy out. And a few friends have buried it not paying attention.
I DESPISE powerturners......And only do it when needed
How many of you guys...
I think I will my have boat pulled out of storage tommorrow and check it out...........Tossing around the idea of a New Years day run anyway....lol
I know a few of us had "loose" steering issues. I found what I thought
was a loose part at the tilt steering.
I also looked back at the steering clamp block by the engine. it had quit a bit of...
I also had the sloppy issue......
I think my clamp/block down at the rudder might be sloppy.....But I also found that my wheel had quite a bit of play. I reached under my dash to the bottom of the...
I bought a roll of the thinnest I could find.......Hope it works.....lol
I had removed the set screw it was just on there for so long I think it was a pain to get off.......But I got it!!!!!
After pulling the V drive there is a bunch of room...lol
Made my own gasket...
SUNOFABISCUIT.......Ended up pulling the v-drive......Now does anybody happen to know a model # for a new gasket??? LOL
This quickie job I thought I was going to do has turned into a huge...
I got the nut off this evening then decided to pack it in for the night .......A few more steps and I will be 1/2 way done......lol
Looks like the V drive might be coming out to get my coupler nut off.
Anybody know what part # the gasket is between the v drive and trans? Or can I just use permatex.....
CWB Marius is a great board and if you got the $ a DB9 is very light!!
I've ridden the Marius shape for a long time and love it. The newest shape "11-"13 is loose to Me and it has nice soft...
I'm going to turn the shaft and see if the offset changes any as I turn the shaft and that should tell me right away if it's bent......Maybe it is out of alignment and that is what caused my seal to...
I spent a good couple hours trying to get my prop shaft coupler bolt out and could not get it to loosen?
I was cranking on it both directions and al it was doing was torquing the shaft....When I...
I rode a Monarch a couple times back when they first came out. That board was really nice. It had a lot of pop and was nice and light with pretty soft landings. It was just a bit to small for me...
Didn't he do a roll to revert ?
Anyway looked good....
I know he was at the CIE springride this year at Bass Lake. I wonder if that is where he filmed it?
Great song also....I can live with the...
Mine leaked also and I usually run 1100 lbs in the nose....So I just kept a decent seal of silicone and its been working.
Leaky lights and stupid staples poking everyone in the arm on the observer...
Glad to hear you like the new board !
My buddy didn't make it down from Portland so I didn't get the Vibe/Answer combo....Oh well I have enough boards as it is....lol
I rode 2008 Answers from CWB up until this year. I would get a newer pair every other year of the 2008's Loved those boots.
I recently got a pair of 2011 AA's by CWB and love those also.
The Zues was a higher stiffer binding than the Factions or Answers. And the old shape was a tank for sure!
I have heard that Ronix 1's are just about the best most comfy binding out there ! I...
I think it will be fine for you. I ride a Marius 140 and I'm 6'2 225 so I think you should be good on a 138 Faction.
I was thinking of picking up a Faction 144 for me to play around on but I got a...
A bigger board will land softer. And from what I hear the Faction lands super soft.
A friend of mine who is about 6 ft and about 160 ish rides a 138 DB9. Which is the same shape just Bamboo core...
So do all boatmate trlrs have these kind of hubs? I have an 07 LSV with a boatmate trlr and no clear window, But there is a silver cap but I don't recall an emblem on it? I do remember seeing a screw...
San I have a couple extra. I had to buy some but I don't remember what size they were ?
Just remind me next time we meet up or we need to just make a time and meet at Swabbies for lunch and I can...
you add speed when going with the current? I thought you would add speed when going up river?
I ride the Sacramento river and I always prefer to ride up river, It just seems like the wake is...
I'm just used to rpm I guess because my old 86 Nautique I used to go by rpm since the speedo's didn't work.
I've heard the new gps version PP has issue's on rivers with current is that true ? I...
Results 1 to 25 of 181