Check the safety switch which is located behind the distributor. It threads in to the motor and has a purple, red & orange wire that go to it.
If any of those wires are mixed up or not connected to...
Type: Posts; User: AaronWhitt82
Search: Search took 0.04 seconds.
07-14-2011, 07:34 AM
It's pretty simple if you have a DD...
Remove the rear seat
Remove the rear panels that sit in front of the tank and what the back seat rests against.
There is 2 metal straps screwed in to the...
If you are using the correct fuel pump (Carter P4389) it is a low pressure pump.
Max PSI is around 6PSI.
Also, the fuel pump should NOT run with just the key in "on" position.
The fuel pump should...
Thanks guys !!!
Hey guys just in the last few weeks I've been having problems with the bearing buddy on the right wheel.
After driving just a few miles it backs itself out of the hub and I have to take a hammer to...
This thread is almost 5 years old... You should start your own thread and you will get more replies.
I'd check the float levels in the primary & secondary fuel bowls.
Maybe a stuck needle and seat?
Carb also might need a rebuild
Weak fuel pump pressure?
Loose connection on the fuel pump terminals
If you have fuel flowing out of the fuel line when you crank it next thing I would check as suggested above is to see if you have spark.
Pull a spark plug out and see if it's wet with fuel.
Has anyone used these guys before for prop repair? http://midwestpropeller.com/
I sent a 13X12 OJ to them and it arrived on Tuesday the 31st.
I had it back on my door step on Saturday the 4th !!!!...
Disconnect the fuel line where it connects to the dual feed lines before the carb and put it in a plastic bottle.
Crank it over a few times and see if you have fuel coming out.
If not check the...
My gauge has always read around 11 or so ever since I've owned mine. Obviously the gauge is wrong or it's the voltage regulator on the alternator.
I've been using a Optima blue top battery for 5...
06-07-2011, 03:15 AM
After all the problems I've had with mine I pretty much know the fuel system like the back of my head LOL
I would start by disconnecting the fuel line where it connects to the dual feed line right...
Thanks guys !!!!
Yeah I can't believe it was just a loose terminal(s). There is rubber boots that go over the terminal where it connected to the posts on the fuel pump so I couldn't actually see...
Hey, how is everyone doing ???
Haven't really posted since Fall last year... Got the boat out of storage 2 weeks ago and got about 5 hours on her so far.
It's been a really crappy Spring so far in...
Thanks for the info guys I appreciate it !!!!!!
I currently own a 2007 Ronix Vault & Cabal bindings.
I want to upgrade to something newer and I'm looking at the Mana, but unsure on what boots I want.
I see that Ronix went to the "baseless" boots...
Here is a list of compounds/polishes/waxes that I use and the gel looks like a mirror....
I get most of these items on autogeek.net
Klasse All in one Polish & acrylic sealant
Well it's getting to be about that time to start thinking about Winterizing and storage.....
I would like to wash the cover for the boat as it is quite dirty and has mold spots on the inside of it....
08-26-2010, 12:09 AM
Well I guess I should have done more research before ordering the bearing kit.....
The ones I ordered are for a straight 1-1/16" spindle and mine is tapered.
So anyone that needs information on the...
08-25-2010, 05:50 PM
Yeah after doing more reading about the bearing buddies and re-packing bearings over on Iboats I'm going to make sure I re-pack the bearings at least once a year.... Some of the guys said on Iboats...
08-25-2010, 01:00 AM
Hey guys today I got myself in to a fun little project.....
Last week I had new Goodyear Marathon's put on the trailer and when I went to put the wheels back on I noticed the right side drum brake...
Yup that is the OEM carb that Indmar used. It is a Holley 4150 600cfm, vacuum secondaries PN 75021-1...
I just bought some of these today to replace the Marathon's that are on my trailer now. I believe the original Goodyear's are on their now, but not positive. The tires are dry rotting and cracking...
That is usually a sign of a bad power valve when you screw the air/idle mix screws all the way in and the boat does not die.
Another thing I would check is the secondary speed screw which is on the...
Yes, I would use the blue stabil every time you fill the boat up !!!
Results 1 to 25 of 264