Search:

Just one more reason come August 1 we are dumping AT&T contract plan and moving to a pre-paid plan. Estimate that we will save roughly 100 a month for our 3 phones.


Sent from my iPhone using...

If you don't have to remove the platform for storage, I would bolt it on. I went through 4-5 of those thing before I got tired of replacing them.


Sent from my iPhone using Tapatalk

I've been raised in a family that has always had a lakehouse, boats, jetskis, etc... However, in 2011 my wife and decided to get our own boat because my son had started wakeboarding the summer...

Yes the diesel oil will work. I run Shell Rotella or Delvac 15-40 and run the Attwoods label tractor sae30 in the v-drive. I get all my oils at Tractor Supply or Attwoods which ever is on sale at...

Very nice, love the color combo!!! wishing I would have stayed with that combo but my son won out this time on color...

Not much more to add from what was said above. Basically boils down to personal preference, demo as many of them as you can and start to narrow it down. My son's preference is complete opposite as...

I had the 325 in my 2010 LSV and now have the 345 in my 2013. Night and day difference in as you said the obvious hp and torque. I think the "special" thing with the surf motor is it recirculates...

Looking at what our diecut stickers cost, The blurfx graphic has so many little cuts that have to be done I think it would cost a ton to have a vinyl shop do a one off piece. Not to mention having...

Heartbroken about the events over the last 2 days and we still have one more day. I have a few friends who survived in the Moore area but lost their houses and 1 is a pastor that lost their church...

With VoIP technology nowadays its likely not even in Canada. More like Nigeria or something like that. I went though the same thing selling my boat. It's funny to read the messages and the...

Contact your dealer but I believe the blurfx graphic is around 400.00 plus whatever there specific labor rate is.


Sent from my iPhone using Tapatalk

While in the boat, facing the side hook my front arm around the tower by tower speakers and lift quickly by leaning back . When the tower gets up I shake the tower to get it passed the area that I...

Same here. But I've learned how to do it myself.


Sent from my iPhone using Tapatalk

Take them off and put regular shoe laces in..


Sent from my iPhone using Tapatalk

Let your tower down and tighten the nut on the back side I the knob. While you are doing this also clean the threads on both the knob and the block it screws in to. There is probably powder coating...

Thanks for the nice comments. He's riding 2013 Hyperlite Franchise 134 with HL system bindings and HL Air Jim's boots. He's been really happy with the board. Really likes how wide it is between...

The river is down to about between 9 and 14 feet. Lake Oologah which is north of the port has been so low that the dam has been closed since early last summer. Any additional rains in the area...

Thanks, due to the river being so low right now adding a bunch of weight does nothing but drink more gas. So with that said, I'm pulling him 22.5 (downstream) 70' and ballast is stock 60% front...

Here's my submission for the may thread. First day out without the wetsuit. I think the warm weather is finally here for good.
http://vimeo.com/66486801
...

http://www.slsports.com/wake-hydratak.html


http://www.amazon.com/Straight-Line-Wakeboard-HydraTak-Dyneema/dp/B004LR599U/ref=sr_1_1?ie=UTF8&qid=1368144523&sr=8-1&keywords=Hydratak

Hydratak...

Then I would go with the fly. Prefer the suede handle compared to the foam and don't like the coated lines. Just my .02


Sent from my iPad using Tapatalk

Marketing!!! The most expensive one is the "Team" handle. Followed by the Fly which is the "lightest" one. Then the plush which you can get the cool brightly colored coated lines. Look at...

Has anyone heard that excessive trailering can cause the paddle wheel to spin too fast thus messing up sensors. Mine was doing the same thing that you describe but no visible damage. Boat mechanic...

Mine came loose. Removed the speaker, side seat cushion and front cushion. Used my son to help through speaker hole, guide a long flexible extension on the end of a nut driver with deep 1/2 socket....

Don't most states have requirements on where the registration is supposed to go? Oklahoma does, the position lines up with front of the bow hand rails on the LSV.


Sent from my iPhone using...