Search:

motosno963,

The part number for the 2004 tower knob is 104033 and is available through any of our dealers.

*Please note that this is a different part than the knob on the 2013 OZ tower...

Please give me a call and I can help you address the issue. The tower should not be used with only 1 knob installed.

Jon Allen
Customer Service
Skier's Choice, Inc.
865-983-9924 ext. 148...

The bow rails mount to our boats using a stud that threads into the bow rail, then when installed on the boat has a nut and washer that tightens the rail and stud to the gelcoat/fiberglass. ...

Give me a call or send an email. I'd be happy to take you through the factory.

Jon Allen
Skier's Choice Customer Service
865-983-9924 ext 148
jallen@skierschoice.com

I apologize for the issues with the website. Feel free to contact me with any questions you may have.

Jon Allen
Skier's Choice Customer Service
865-983-9924 ext 148
jallen@skierschoice.com

For the 2013 ballast system on the LSV and Mojo, your timers should be set at 6 minutes for the rear bags (650 lbs each) and 4.5 minutes on your front hard tank. It is recommended that your engine...

There aren't any boats currently going through the line with this option but I have attached a few pictures from boats online of this option. This is shown on a 2013 LSV.
...

On the 2013 LSV, the nonskid package includes a Moomba etched pad at the footwell and the step pads near the base of the tower on the deck.

The 2013 Mojo has the same, but also includes the two...

Supra and Moomba do not share hulls/molds at all. The LSV and the 22SSV are different hulls. Like suggested before, you can try to contact Boatmate to see if their trailer can work for different...

The 330hp will have the filter on the engine. In some applications it actually makes it a little easier to change this filter. There will not be an upgrade option for the remote filter. The 345hp...

For 2013 we moved the oil filter a little further down. On the starboard side, fold the engine access panel down and look directly under where the old remote filter used to be. It is actually down...

The PDM is a Power Distribution Module. This module always has power (+) running to it. When the switch is turned on for the pump, it basically sends a ground (-) signal to complete the circuit. ...

We no longer use the individual control boxes. We now use a pdm to control the pumps. When we did use the 3 boxes, we used 6 ga wire from the battery to a bus bar at the pumps, then 12 gauge from...

I would suggest running a large gauge wire direct from the battery with a breaker/fuse back to where your pumps are located. You need to allow 20 amps per pump to determine breaker/fuse size. From...

Mike,

I have been in contact with Bell Marine about your boat. I have given them a few items to check. Let me know if there is anything I can help with.

Jon Allen
Skiers Choice Customer...

Yes, this works for the zero off system as well. The only difference between Zero off and Digital Cruise Pro is that Zero Off has a GPS antenna it reads speed from.

Here is some information that all of your dealers have access to:

Music Input Options for the 2010 MB
Quart Stereo Systems
There are several options for importing music into the 2010 MB Quart...

Skiers Choice part number 105009. Call any dealer and they can ship directly to your house.

Your tower is 1 5/8" diameter.

Justin and Clay at Diamond Lakes WaterSports were made aware of this thread and the discussions of their opinion on the Mojo. They wanted me to post this on their behalf:

We have a 2012 Moomba...

Send me and email with your name, model, dealer, order number, and spray date and I will do my best to send pictures.
jallen@skierschoice.com

Here is a link to my dealership's blog, showing a quick write-up on our new Mojo. Feel free to post any questions. Thanks.


http://diamondlakeswatersports.wordpress.com/

I have a Mojo going into production next week so I should have it around the first of December. I would be more than happy to let any serious potential buyers demo this boat with whatever ballast...

Change your fuel filter.

Haha. Here is the closest I would get to my name. Makes me look like a bit of a pansy. Haha.

www.jallen.com