Search:

Your right about that being for 4 speakers on one channel, didn't notice that at first I guess. Work can be distracting sometimes!! These Polks sound good for the money but they are kind of a pain.

According to the sight if you do the series parallel combo the amp will still see the 3ohm load which will allow the amp to push the same power its pushing now. It looks a little complicated but...

Hey bzubke1 check out this sight on different wireing options. The third example combines series and parallel to keep lowering the 3ohm load. This might let you hook up that other pair of cabin...

Pre Amp signal. Stupid auto correct text.

Ok, just for conversation. I bought this amp because my buddy's new (2010) enzo runs 3 of these amps and they scream. This is the factory system, all skylon speakers. 6 in boat coax 6.5's on one...

Thanks for the input Brian. You confirmed my decision to just run on 2 of the 4 channels. Like I said before, I usually over analyze things ahead of time so I don't have these problems. This time I...

That makes sense. Thanks man. I may have another use for this amp, but I'll have to run it for now. Definitely don't think I'm gonna bridge it.

That's what I always though too, bridged equals 2ohms, but that is based on using 4ohm speakers right? The manual states bridged power is 175 watts at 4ohms not 2ohms, that confused me. I think they...

So the Kicker 350.4 was waiting at my door when I got home from work. The certificate said 425 watts total. I hooked it up straight not bridged and measured the ohms at the amp while running, it...

That's one thing I was worried about. My buddies new (2010) Centurion Enzo is running three of these amps and I was impressed with them, so I ordered one to run my new tower speakers. Mabey I...

Thanks for the multi meter suggestion, guess I should have thought of that. The Polks measure 3.3ohms and an old speaker I had just laying around measured 3.8. I guess they are a lower ohm speaker....

I just installed a pair of Polk MM651UM speakers in my tower cans, and will be running them with a kicker 350.4. Should I just run them off 2 of the channels and save the other channels, or should...

Pulled the factory thru-hull today. I used a heat gun to warm the sealant and a long 1/2" extention to wiggle it loose from the top. I'm ordering a 1" from wakemakers, the hole in the hull is about...

Sorry. Guess that was kinda vague. I'm using both to fill through sprinkled valves. Looks like they only draw half the amps of the rule, so guess I could just connect into factory wiring. Am I...

Any suggestions on the best way to wire in the dual 1200's?

Awesome. Sounds like the 1" 1200' s will work great as drain pumps.
On another note. I pulled the floor panels up and noticed the lines for the front ballast bag were crushes at the front of the...

Anybody ever run the 1200's for empty pumps?

So I'm upgrading my ballast intake to dual Tsunami 1200's with a larger manifold for the three sprinkler valves. I know this isn't the best way but it fits my budget. So my plan also included...

Sorry should have said tower speakers. Here is a link to the Bazooka sight check them out.
...

Does anyone know anything about these? I have used several Bazooka subs, which are great, wondering if these work as well. I just can't afford wetsounds or the like. I'm looking for something more...

I had a similar problem this year on my 05 Supra. If your paddle wheel unit is like mine there is a bundle of wires coming out of it. About 6 inches from the unit is a big plug. Unplug it and make...

Add me to the list too. 2005 Supra 21V. I found the water about 2 years ago, and after having the dealership get it out and then repairing their hole it filled up again. I put in a 6" access...