Search:

One other option. Harbor Freight sells some standard pullers (3 and 4 fork) in a package that works awesome. Around $25 bucks if I remember correctly in a 3 pack (small, med, large). Works...

Just replace the cable. I tried all the same "defensive" things that you also have done but eventually the answer is to bite the bullet and replace the cable. I did this 1 season ago and the joy of...

If you've checked the fuse, also check and clean the connections on the back of the switch. They can get junked up over time and simply not having a good connection when you flip the switch means no...

Yes. You can also take it completely apart and find out if you got a bind some where. When I installed a new steering cable last year, I grabbed the bar by hand where it connects. It actually was...

Also, need to check to see the pumps are working correctly or engaging when you flip the switch. I found that in some cases my pumps were not working properly because of no electric connection from...

So Vandy, good riding with you this weekend. Reading your thread reminded me that you don't have your throttle cable zip tied. When we were looking at your engine and doing the head scratching, I...

Just to confirm from my last year experience:

1) Pull the floor. The cables are zip tied and you can do some damage to other tubing and items that also run under the floor by pulling via a rope...

Does this cause the impeller to burn out? This looks like it by passes the impeller. I can't tell from the picture, maybe you installed it just after the strainer up from the raw water intake and...

I've used a product you can get at Overtons or Amazon.com called Tear-Aid. Small holes or tears can be covered with this and get you through the season until you want to get them repaired or fixed....

Did you find the part number for the LSV Steering Cable Replacement? I've unhooked mine from Rudder (pain to reach but easy) and have loosened the 4 bolts that hold the cable shaft tight in back
...

OK. Just information back to the group in case you run into this and didn't think to try it out.

#1. I've learned to take out my starter and put it back in in under an hour. Remarkable but...

So I'm jumping over to this thread because I'm experiencing same type of issues and can't figure it out. Thanks gcnetti for taking the time to be part of thread. So here is what I've done to try...

So I appreciate all the help. So far this is what I've done. I've checked the resistance on the power cable that goes between battery and Starter. 1.3, so I assume this means cable is still good. ...

So I'm on the lake and can't get the boat to start. Same clicking that everyone in this thread talked about. But only clicking, time and time again. So hooked up another battery and jumped the...

Noticed the re-post. Give me the details:

Looks like they are in good shape. Any issues with them?
Did you have them on a standard Moomba tower? If so they will fit mine?
$200 is price? ...

I've had the same issue with my 04 LSV. Instead of doing that work, I hunted around some boat shops and found a throwable life preserver (which is standard state requirement that you have one...

Thanks Volfo.

Ok. Smrtz or Mid Tenn LSV, you guys need to reply either that you want in on the Seadek deal or that your off. I went out to lake again last night and just get pissed every time I look back to see...

XLV3BGR.

Let me know if you only wanted one. I am interested but only need one of the two. I'll be out in SLC in July and could arrange for payment/pickup. If you want both, no big. Just let...

those look to be a nice set. The speakers look pretty good too. Is $500 the firm offer. May have a buddy that might be interested. Can you give specs on amp?

Update:

Dug into this project last night. URRRRRG. Tried installing a little larger bolt (didn't work) so went to a larger diameter screw (didn't work). Not really anything to grab and keep a...

Thanks guys for the input. I'll give it a try this weekend. Tried the lubricant and let it sit all day while at work, must be really stipped in there as nothing and no amount of pulling and...

Awesome pic. What lake, where you located?

Your quick story reminds me that the joy is in the sharing, not always in the receiving. Keep giving bro!!

Ed G. You are the man. However, let me lean on you and the group for some more help. One of the screws backed out fine and the vice grips allowed for me to grab and muscle it out. The second...

Putting the boat back together for the summer and have stripped screws where the gas strut attaches on one of the back Hatch doors. I can only get one of the three backed out and the others are...