Search:

1602616028
'06 F-150 "King Cobra"

Check this page out, it has some pretty good pics, links and some DIY video and discussion. www.wakeworld.com/forum/showthread.php?p=1774872

Have you checked the back seat of his car? I got mine at a metal supply shop called Metal BY The Foot, the sell all sorts of metal in any quantity. Any metal supply shop should have it or a...

If you've never had it you won't miss it, but if you have had it before, especially on a boat well below the standards of these boats, you will definitely miss it. Point being, my wife is not much of...

[QUOTE=E4NASH;187856]How exactly does the plate mount on the rail? I know screws or bolts but where does it mount? Do you have to drill new holes? As moombahighrider said the plate...

How hard is it to remove the seat? If you can take it out, then I would say the mod would be nearly the same. Only difference would be mounting it to the floor, but could probably put spacers between...

I don't think a cutting board in place of the metal plate would be rigid enough to support the weight of the seat and driver. It isn't mounted flat onto the slide rail, so the plate has to be strong...

155551555615557Only problem we had with the non-locking swivel was when surfing the seat wants to turn to the side that is weighted down. It really wasn't a problem for me, but my wife has shorter...

I went with the thread that Newty posted, I know someone else did it too but I could never get their pics to download on my computer, for some reason I can't always get the attachments included in...

Very good point

I understand your point, but wouldn't that set up lead me back to the original problem of air entering the bag thru the drain line when I'm towing the boat on the trailer?

My "only $34" should have included that $8 of that is shipping.

I only had to spend $34 and that is with 12' of hose + parts, I had a $5 coupon for reviewing the 1100# upgrade I got from them. Your sig. says '05 LSV but your mentioned the 2013, sounds like you're...

Hey ga-lsv05, I just ordered my parts from wakemakers. I got the check valve and wye fitting that brain linked to above. I spent morning going to our home depot and lowes with no luck at finding...

Those are very nice. I've got two girls 4 and 6 that have started surfing tandem with me. I thought I was having fun boarding with my buds before, that doesn't even come close to riding a board with...

It took me a minute(or 5) to digest what fman did. Just to be straight, I'm going to attach hose to 3rd fitting on bag (the one that is currently plugged) and run that up to a Y-fitting to which I...

I just recently started having this problem and were wondering what you ever did to fix it. Thanks

I used around 16' of 14 AWG. I ended up splicing 8 wires for mine. We took our boat out yesterday and it is well worth the effort put in to switching them around.

And 1 more update the 2 carriage bolts for front I used are 5/16"x1" and I used lock nuts on them as well. And one more mod I completed today was switching the wake plate gauge with the battery...

One thing I forgot to list in parts was 4 lock nuts for the 1" carriage bolts

I went with the thread that Newty posted, I know someone else did it too but I could never get their pics to download on my computer, for some reason I can't always get the attachments included in...

Thanks guys. I just finished my swivel seat and was able to get a full 180 degrees of rotation so I can kick legs up on the back seat.1544915450

15442 I got the ballast switches relocated today. Thanks Al for the walking me thru it. I was a bit lazier and rather than remove the panel after cutting the hole in it, I used a roto-zip bit in...

Al, that is exactly what I've got in mind. And adding a power switch is a great idea. Thanks a lot for your help.

I am thinking about moving the ballast switches in my '07 LSV from their original location to the panel next to arm rest. I have searched old threads and haven't found anything. The only possible...