Search:

It does have the SS Rubrail and End Cap.

Sorry for the delay, here are the pictures with the set screws:
1501915020

That's who I would recommend as well.

Need the plate now because the platform does not drag in the water like the old one did. My old one was actualy acting like the plate to some degree. Atlanta Marine did the install, using existing...

I just put one on my LSV 07. It sure takes a lot of pressure off the platform when surfing because the platform never touches the water. That was my main reason for the change. I do have to run 1/2...

http://www.youtube.com/watch?v=3m00DsjLfKg&feature=channel

mobius lsv 07 with 1100 and 400 ballast

Thank you.

Can anyone tell me a good inexpensive place to order parts (Oil Filter, Fuel Filter, Impeller & Plugs). I want to compair the price against my local dealer. Thank You!

I don't check this Forum very often but I will now. God Bless you all!

I made two indivudual L brackets out of 1x6 Cyprus with a dovetail joint. They have worked well for me, I have 1100's in a 07 LSV.

If you buy the 750, I bet you will upgrade to the 1100 withing a year.

I will try and turn slightly to the side I am surfing on, so if I am surfing port side I will turn slightly to the left. When the person falls I will turn to the opposite side to go back to them;...

I would recommend at least 750lbs on the rear surf side and 400 in the middle ski locker. I start at 10 mph with no wake plate and add plate as needed to clean up the edges, which is usually about...

I have the aerial quick release as well. I have had it for 2 years and it's very solid.

This is the wave I get with 1100 in port side and 400 center and 2 normal size adults on the boat.

http://www.youtube.com/watch?v=3m00DsjLfKg

I agree - mix it up!
http://www.youtube.com/watch?v=A7AFsIVsLSM

http://www.youtube.com/watch?v=PqpZRGE6MxM

I started getting and "Error 1" on my tach where the Hours normally display. The only thing that stopped working was the + and - on my cruise control. My dealership says they want me to bring the...

180 on my LSV 07.

I will also be interested in the Error 1. I started getting it last weekend, everything is ok except my Cruse Control will not allow me to make + or - adjustments once it is set.

I got mine on last weekend. Pulling the old one off was a bit of a problem. I ended up using ALL of the below items:
1-Prop Puller
2-Hammer
3-Torch (make sure you leave the prop puller on while...

I replaced my port side locker 750 with an 1100 this year. It helps alot when we lack human balast.

Orderd a 1161 yesterday, Thank you all for the Discount!

I did check the level and asked my son to post this question as I was in route to get the fluid. What I needed to know was if it should be checked when it was hot and runing like a typical vehicle or...

how do you check the transmission fluids and add more in a mobius LSV year 2007?

I installed the Johnson pumps this spring and it has worked well with my 1100lb sac's.