Search:

Anybody from Ontario (Canada) know of a good boat detailer in the Muskoka region? Someone who know what they are doing? I have had some bad experiences with some of the marina's and want to get...

Still for sale?

I was yelled at this weekend for the first time..... neibour keeps a float plane on the water tied to his dock, I guess it takes a beating......

My boat is not nearly as bad a s most of them out...

This is why I had the gloves on dude....... rope is hard on the hands.

This is the best pic i have for waterline.... Not sure if it helps.

Here is the result with the 2 Fat Sac 750lbs. They fit perfectly!!

Thanks for all the help!

I have not had mine repaired yet. If you can post pictures of the repair, that would be great help!

Thanks.

I would think that Skiers Choice would cover something like this under warranty. I have used the seat in the sundeck position a total of 2 times I think! My boat barely has 70hrs. on it.

I have an 07 Outback and it seems that the port side seat back has "collapsed" a little from having the rear seat in the sundeck position. It is right at the top of the seat back where the seat would...

Thanks for the advise Ed,

I just want to make sure that I'm gettting the correct bags for my boat. The W707's run about $250 each up here in Canada and I want to make sure I'm doing the right thig...

Has anybody tried puting the Fly High W707 (750lbs) on the surfside beside the engine?

Fly High Pro X Series Fat Sac™ - W707

I'm worried that the 707 will not fit very well on the surf side of the boat beside the engine cover. Have you had any experience with that set up?

Ed, you seem to be the expert on this subject.

What bags are you using in your boat?

Thanks for all the tips.

So if I get 2 Fat Sacs W V707's (750lbs) and put one where the seat goes and one of the surf side of the engine, I will have a nice big wake!

Will that work well? Or...

Hi Everyone,

About 2 weeks ago I got hooked on wakesurfing. I am typically a skier, I wakeboard a bit but loved surfing!

I have bought a board and a line but need to upgrade my ballast in order...

Looks like Enginenut is correct.

I just took the boat out again and took the flame arrestor off and had a listen. It is air going through the throttle plate!!

I dont know why it only happend...

it only happens loaded, when i'm between 2,500 - 3,000 RPM's anything above or below that, there is no noise.

The noise only happens when I'm runnig in the water at speed. It does not happen when at a stand still with the engine revving at 2,500. Therefore, it seems like it could be the throttle plate.
...

How do I tighten the belt? I can try that to see if it fixes the problem. Also, is belt dressing a good solution for a sweeky belt or should i be changing it?

I ran it with the cover off and the floor out. Sounds like it may be the belt! Very hard to guage where the noise is coming from but I think its the front of the engine.

Maybe it just needs to be...

Ok,

Impeller is fine. Any other ideas of what could be causing this noise?? It's driving me nuts. It only happens between 2,500 and 3,000 rpm, only when i'm actually running on the water. It does...

Do I need to lubricate?

If so, how? Where?

Hi ALL,

Thanks for all the great info on this forum.

Going to replace my impeller for the first time and wanted to make sure I have the process down. It is on a 07 Outback DD.

1. Open...

Not overheating at all, i'm consistently at 180, engine has under 20hrs on it so the impeller should be fine unless i chewed some thing up.