Search:

Any updates? How far back from the boat are you riding?

I did gI to gIII upgrade last year, parts from wakemakers as well. I immediately knew what the first mod would be this year - new prop. Fully loaded mine struggled on the stock oj, if you guys...

http://img.tapatalk.com/d/13/05/24/zu5edute.jpg

Do you mind hooking me up?

I looked for it on my boat when doing preseason maintenance and didn't see a fitting either. I can't remember if there was a cap on top. If so it probably comes off with a screwdriver. I should have...

Wow sucks you had a problem on the water. It's crazy the exhaust manifold got that hot to melt the fitting. It seems to me that if the list from a loaded surf boat affected water flow, which I don't...

Your going too fast. With my OBV we started around 8-9mph and are increasing speed as we add weight. With your setup start try 8 mph. I was 220lbs+ when I started (now 202 woohoo!) and at much over 9...

Should be somewhat straightforward to trace down with a multimeter and wiring diagram.

If the pump doesn't prime when you turn the key from off to on (not all the way over to hit the starter) then your problem is in the wiring. It should prime for a couple seconds then stop until you...

With flotation - forgot to put that on PayPal message

Order placed! 2 black/green, 2 black/pink, 1 red. Thanks

Congrats. There's nothing like the feeling of driving out of the dealership with a new boat! My friends family has a place on white lake and I'm sure we'll bring our boat down there this summer at...

Haha, not a chance. It drops off 2 to 3 ft immediately. I have a set anchor off the stern keeping it from hitting the shore. There was hardly any wave action back in that cove otherwise it wouldn't...

http://img.tapatalk.com/d/13/04/28/4asa3y3u.jpg

Pollen!!!

Since I'm a bigger guy I started with a hyperlite landlock, which has served as my board and the boat board the last 2 seasons. Most of my friends have learned how to surf on it, very stable board....

Thanks for the replies! I like the idea of using a bag of PFD's as a bow filler. I bought a bag holding 4 orange PFD's from overtons years ago that I tossed in the closed bow of my old Stars and...

It seems like space is always an issue on boats no matter the size, which has become worse since the addition of our son. Last season I instituted a one bag per female and no personal coolers rule to...

Thanks for the replies. He was quoted $3k at a local upholstery shop including new carpet. It seemed high to me considering no pattern on the seats/sunpad but I've never priced boat interiors. The...

On average what have you guys paid to have the vinyl redone in an open bow ski boat? My buddy is looking to get his 99 pro air nautique DD done in a plain and simple off white vinyl without any...

For basic diagnostic: If its a Holley carb start by taking off the flame arrestor on top of the carb. Have someone pump the throttle while you look down the carb, paying attention to the front two...

My wife's family has a place on gaston, with enough notice I'm sure we could make it.

I used Gresham lake upholstery to do some work on my camaro. They did a good job and had better prices than other shops in the area. I would give them a call. There is also a place right on hwy 98...

In. I bought the orange moomba t from white lake marina this summer and it is really thin and shrunk bad after the first wash. Needing some high quality moomba t's over here

My stock 08 OBV with the stock 4 blade prop will run a speedo indicated 43-44 mph depending on conditions.

Panthers! I try to get to Charlotte for 1 or 2 games each season.

16040

Only pic on my phone, about to head to the track.

2010 silverado 1500 z71 6.2 liter. It hauls the mail for a 4 door full size!