Search:

I didn't take any photos but I can the next time I pull the cover off. Maybe this weekend?

I was wondering/ thinking the same thing, David.

Barefooter, I hear what you are saying but a lot of our boats (moomba/ supra) have had this problem from the get go. My boat, for example, has done this when in hot weather since I bought it new from...

Ditto, my experience has always been good with Wakemakers.

I just changed my 08 lsv dripless feed from the factory designed hot water supply on the exhaust manifold to a cool water supply, like others have shown it done on newer models.

My oil cooler also...

Sure, just make sure those rivets are stainless. You don't want anything to rust. That would suck...

I have the two pumps on my 08 lsv an I still get vapor lock.

It's just one pump plumbed into another, both mounted on the block. The heat transfer from the block creates the vapor lock when...

Any insight into what the bushing part number is that you replaced? The inboard online website is not working so I can't see what options there are. Also what extra parts might I need besides the top...

While I agree with the advice these guys are giving you on what bags will work best (and I do not have a mojo, or ridden in/ behind one), I would be surprised if you could not get started surfing...

I would advise against it, because of the poly beads. This one might be higher quality than mine but I had to do some major mods to stop the poly beads on mine from popping out of the groove as you...

Obviously treverspence got in first, but I am interested as well. I'm thinking these could be beneficial to the crossover system I want to do for switching lockers from regular to goofy wave- I'd...

I have had the same issues as you all. I've had the starboard one in the bow fixed under warranty, after getting it hand tight on the lake. Unfortunately, it has come loose again and I am pretty sure...

Mustang,

Pmed you. I am on tapatalk and do not see an email address anywhere.

That's going to be a nice system, moto! Way to step it up!

You make a good point, however I'm in Phoenix right now and it's HOT here this week (we are thankful to be missing the CO weather right now). We walked through some misting systems the other evening...

Anyone tried this?

I figure everything is there and it's just a bit of hose and nozzles.

What should I be concerned with?

That's about as low as mine will go on my 08. Mine goes only just past the plane of the hull. How much further are you thinking it should go?

That right there is a good idea!!!

That is a great point. I have never thought about from that angle....

Make sense to me.

You had me going for a minute. Let us know how it stacks up against the other mojo's on this forum....

That's what I was thinking. I searched for the thread but found nothing.

Ausfire is his name on here.

No problem at all, in regards to strength, although I am not sure on the comfort factor to lean against it. No one has ever tried, as far as I can remember. It is mounted pretty straight up and down.

Mike,

I might take it off your hands if your looking to sell it. Let me know...

It was something very similar to this one. I can't tell if this one has metal bearings or the poly insert, but mine had the poly insert and that is the one negative to my version. Definitely go metal...

We had a slide in truck camper up until this fall. Sold that because we bought a 32' 5th wheel. The truck camper was just too tight on living space for us and we only have one kid right now. It had...