Search:

For a little clarification to my original post: The procedure and the time I quoted are for the actual removal of the impeller. On a direct drive everything is right where you can see it and pretty...

That prop was for the 1.23:1 gear reduction transmission with right hand rotation. Your current boat is a 1:1 transmission with a left handed prop. Brian Raymond

You can contact your local dealer for replacement parts, or the "Parts Guru" Anthony Cooper at Skiers Choice. You can contact him email; acooper@skierschoice.com for pricing and availability. If your...

"bulletin board". Check out the "search" and "quick links" to find more info. on a speciffic discussion. Brian Raymond

Salyers, sorry to hear about the mishap. Drivetrain damage can really be underestimated and be costly in the long run. I would take the boat to your dealer and have them give it a once over....

The 14.25x14 wakeboard prop. is a awesome prop. for standard weighted and heavily weighted boats. It delivers the out of the hole and steady driveability needed for loaded boats. It maintains the...

Congrats on your new boat and welcome to the board. Your system starts with a 2000 gph fill pump that feeds to a manifold. This manifold contains 3 diaphragms with electric controlled solenoids that...

I would install it between the water pick-up and the raw water pump (driven off the crank shaft). If your tranny cooler is before the raw water pump, place it in between the pick-up and cooler. Place...

04-21-2009, 02:51 AM
Brian Raymond
Administrator Join Date: Aug 2002
Location: Maryville, Tn.
Posts: 374


...

Port aft bottom of the motor above the oil filter, it will have a single light blue wire going to it. Brian Raymond

What model, yr., and eng. do you have? In-line fuel filters have been used since '04. I suggest changing it first. I would change it every time the oil was changed. The fuels differ per region and...

You can contact you dealer for parts pricing. That system has parts still available. I would take the boat to them and have them take a look, to make sure the proper parts are ordered. If distance...

Good call Sloppy, you do not want to coat the impeller w/petroleum distulates, it will break down the nitrale rubber it is made of. When people winterize thier boats (especially in colder regions,...

I resemble that remark Ed. Brian

I would stay OEM and DO NOT replace w/automotive parts. You can contact your local dealer (they can have it drop shipped to you), or Larry, JT, or Kurt at Indmar-901.353.9930. Brian Raymond

Hope all is well. All direct drives use the 1/4" packing, all V-drives use the 3/16" packing. If you are not familiar with the install and tightening procedure, you can contact;...

I have found this to be the best way for me to remove impellers from direct drives and V drives. First-tools neded; (2) paint can openers, 5/16" wrench or socket set-up, Fantastik spray cleaner....

Check out "General Chat", there is a on going discussion under "confused about batt..". There is a lot of good info. here and some links provided for comparisons. Brian Raymond

The DP (dual purpose) batteries are a highly recommended choice when installing dual batts. on a boat. Make sure they have at least a 650 cca. rating and use 2 of the same batteries. The DP batts....

The red button will pop the breaker when pushed, when this is pushed, a small black lever will kick out. Push the lever back up and it will reset the breaker. Hope this helps, keep us posted. Brian...

Congrats on your new purchase. Welcome to the family. Please keep us posted of the new pix. Brian Raymond

Atlanta, welcome to the clan. This is deffinately the liveliest and most knowledgeable place for reference, from boat owners and Skiers Choice personnel for information and how to's for any upcoming...

The 4010 is silver in color and has either phillips or torx screws that mount the top to the body. The 4150 is bronze in color and has (4) 5/16" bolts that mount the primary and secondary bowls to...

gatered my thoughts, and then

darn, I timed it wrong