Search:

Type: Posts; User: J-ROD

Search: Search took 0.01 seconds.

  1. Thread: Bilge Clean Out?

    by J-ROD
    Replies
    3
    Views
    35

    Bilge Clean Out?

    Quick background, vdrive leaked oil, found problem, fixed it! Now the bilge still has some oily residue because of previously stated issue. What's the best way to get that bilge nice and clean from...
  2. Replies
    4
    Views
    238

    There are 4 9/16 bolts on the bottom of the...

    There are 4 9/16 bolts on the bottom of the v-drive. They were all slightly loose. Is all I did was tighten each one and I haven't had to refill the oil. I think it's good!!!
  3. Thread: Prop Grease

    by J-ROD
    Replies
    6
    Views
    248

    Thanks for the reply! I'll do that before I put...

    Thanks for the reply! I'll do that before I put it back on.
  4. Thread: Prop Grease

    by J-ROD
    Replies
    6
    Views
    248

    Prop Grease

    Last weekend I hit a nice little hidden island in the middle of the marina. Awesome! So pulling off the prop was a joke but got it off to get fixed. I was thinking about putting on some type of...
  5. Replies
    4
    Views
    238

    Oily water in center locker

    I have a 2005 LSV and I always get oily water in the center locker. I have to refill the vdrive every other time I take the boat out. I'm pretty sure the oil coming into the locker is from the...
  6. Replies
    3
    Views
    359

    Thanks guys for the input. I think your correct...

    Thanks guys for the input. I think your correct dhyams on the deck. I wonder if there is another controller out there that would work.
    EarmarkMarine (David), thanks a ton for the response. I...
  7. Replies
    3
    Views
    359

    Aeware remote and sub mounting questions

    Purchased a 2005 Mobius this winter and decided the factory audio was, well, horrible! Replaced the factory 6.5's with JL Audio 6.5's. Added three amps, Fosgate P1000X1D to push 10" JL W7, and then...
Results 1 to 7 of 7