Search:

I definitely agree that it is fuel related!



I'm going to start by replacing the fuel filter. I might go ahead and get a fuel pump to have ready.



The butterfly valve is opening when I...

2nd video of fuel pump:


http://www.youtube.com/watch?v=G7cuYoquQOg

We had the problem again today. I took a few videos. The first one was taken while the engine was running making the sound. I had the flame arrester off. So, it was a little louder, but not much. I...

Hmm, now that's a possibility. :D It's a good thing it stopped!

It definitely was not the bilge pump.

I've never had a vapor lock problem before. The lake and air temps were around 75, which makes me think that wasn't the problem. Can vapor lock cause that...

Today was our first day out this year. The boat ran great for a few hours. We stopped for a bit to let the kids swim and have a snack. When I started it back up, there was a strange air sucking sound...

As a followup, I installed a KMR-350U last night and the Aeware remote worked correctly when attached to the wire labeled as the steering wheel remote wire.

So, I can't use the Aeware remote without also getting a new remote that I would connect the Aeware one to using the butt connectors?

So, would I connect the signal wire from the Aeware remote to the wire from the wiring harness labeled as "Remote"?

I need to get a new HU. I'm thinking to get a KMR-350U because I've seen that it is compatible with the Aeware remote that came installed in my boat (2005 Mobius LSV). However, my current unit...

Those are the ones! Thanks!

Unfortunately, I already threw them away.

I'm getting the upholstery on my LSV locker tops and engine cover replaced by a neighbor. I took some of the upholstery off of one of the lockers. I had a problem removing some of the screws that...

I'm looking for a new mainline that's a little longer that what I have. I'm seeing some great deals on the Gator Boards Vandal 80' Mainline that is black/red and made from Dyneema. Any...

Make sure to test the spot before gluing!! I cleaned the surface really well (wiped off everything that came up, then degreaser, then alcohol) and then epoxied it down. Unfortunately, I didn't...

Wow - bummer of a burn - good to hear it's healing up okay.

How are you supposed to go about replacing the light? I was tracing out some of the wiring recently and could not even touch the light...

I agree on pulling the floor. It's really not too bad (though much easier with someone to help you). Make sure you remove the screws that go in from the side that are under the seats. Also, turn...

My engine only cranks every 7th try or so. It always clicks but doesn't always turn over. Jumping the solenoid posts makes it crank when it is having trouble. I'm pretty certain the contacts in...

Yes, I was running on a fake a lake both times. I had plans on extracting it after our last trip out this year, but the "last trip" never happened. I do run it a little faster than idle with the...

In my experience, it's all about getting your engine warmed up enough. Last year I changed it when it was fairly cold outside (maybe mid 40s?). I ran the engine until the temp gauge showed it was...

I had my cable get so tight that I had to steer with both hands. I ordered a new cable through my dealer and replaced it myself. It was a fairly easy job. If you do it, make sure you turn your...

I was going to post this in another thread, but I can't find it with the new search problems.

I had my first no-go at the lake a few weeks ago. It acted like a weak battery - I'd get a click and...

I fixed the leaking hose and put on a Gates belt. I've put around 25 hours on the boat since then and haven't had any more problems breaking the belt. So, I'm thinking it was the fact that it was...

Wow, I think mine just went out a few weeks ago as well. I still haven't verified that it is definitely the pump, but my switch is still good, and I don't have any blown fuses ('05 Mobius LSV).

I had the same problem with one of the fill fittings on a back ballast all last year. Now, I'm having it with the opposite bag's empty fitting. After further inspection, the threads on both the bag...