Search:

These type of gloves are the only ones I use. I have been using them for over ten years now. They are worth their weight in gold. I think the Radar glove is the best one (and best looking) out...

Not that much. It seemed like I never could get all the bubbles out.

I have a Mityvac which is what I bleed it with. MLA, I will try those things you suggested. One questions, if I can manually move the coupler by hand, forward or back, what is that telling me?

If I have bleed my brakes and yet they still don't seem to work (I can unplug the electrical connection and still back the trailer up) ..... what does that mean? Do I need to replace parts in my...

Using the mityvac, do you suck it through the caliper or suck it through the master cylinder?

If you drain the water, why do you need the antifreeze?

Brian, how did you bleed your system?

Garn

Yeah, that's it! The gauges shrunk! *LOL* It looks like the holes were originally cut too big. Its only on a couple of gauges: depth and tach. When I bought the boat it didn't come with a depth...

It is definitely that the holes are too big. There has to be some kind of bevels that can go around the gauges to keep them from falling through the holes. Changing the entire dash? I really don't...

The wholes in the dash panel on my 07 Mobius LS have worn a bit and now an number of the gauges are following are falling out through the inside. I bought some bevels to go around them to make...

When I had my wakeplate installed, I could have bought a Moomba gauge from Moomba for about $65.00, but I found a Tige Taps gage on ebay for 5 bucks! I wasn't sure it would work but for 5 bucks I...

I was one of the original purchases when you did it last year. I love the wicking shirt. I would love to be in if the design is different then last time. I still have those shirts. I love that...

I would definitely recommend the "horseshoe" ski http://www.bartswatersports.com/catalog/Junior_Combo_Water_Skis/OBrien_Platform_Trainer_OR9C95/index.asp

My kids and grandkids all learned from...

You could try just the opposite of what I'm going to do. Instead of grinding the trailing edge of the starboard side of your rudder, grind the port side.

So the moral of this story is a little bit each time. Don't go for it all on one buzz.

Thanks for your input everyone. We spend most of our time in a course. I want to get it just slightly weighted. I don't want it heavily weighted. I've driven one boat where it was weighted too...

I have an 07 Mobius LS (direct drive) and I would like more tension on my stearing wheel when I'm skiing the course. Has anyone here have experiece with grinding your rudder to get that tension? ...

David, did the Pela work for you?

Garn

Its the bow-filler cushion. The one that turns your bow into the "bath tub" effect. Not sure why you need a picture of it. And did I say Scot? I think his name was James. Oops.

I thought I would pass this on. I went into my local Salt Lake Dealer, Marine Products, to find out about getting a bow cushion for my 07 LS. They looked it up and said it would be 200 and...

How can I tell if the surge breaks on my trailer are working? When I'm pulling the boat and step on the brake, it seems like I'm being pushed more then I am used to. Any suggestions?

Thanks,
...

Jikemones, I'm not sure I understand what you are referring to here. Can you be a bit more specific about where this is at, what it is, and what you did? I have the exact same problem as you on my...

I have on 07 Mobius LS which is the direct drive version of the LSV. I am 100% a slalom skier, as is most of my family. I compete in tournaments with my best being 6 @ 32 off (34 mph for my age -...

I am having the same problem on my 2007 Mobius LS. Can anyone please help with this!?!?

Garn

I'm seriously considering getting a bow filler cushion for my 07 Mobius LS. I'll get it from my local dealer. For those that have one I have a quick question. Does the cushion have metal...