Okay........ One more. Bar stools showed up.
Type: Posts; User: philwsailz
Search: Search took 0.03 seconds.
03-06-2014, 12:23 AM
03-04-2014, 02:03 PM
No way. My wallet does a better job than I could. These are on the brown truck...
03-04-2014, 09:33 AM
Oh Yeah Baby~
Last night was epic. Upper cabinet is in place now, started wiring things up to get computers and AV running again.... The Satellite receiver doesn't work in its current location...
03-03-2014, 02:35 PM
I still need to get the cabinet sealed and the adjustable shelves stained and sealed but the bar is in place...
02-25-2014, 01:07 PM
Use bronze wool and any remaining steel wool that gets stuck in the finish won't rust. Boat builder trick...
02-25-2014, 12:34 PM
4 so far. I am a wood boat restorer on occasion, so I am used to taking a month to get a good build, (20 coats) of exterior UV boat show varnish. I am pickey.... :) The wood boat experience has...
02-25-2014, 11:47 AM
Can I make you a Martini, Mr. bond?
02-25-2014, 11:35 AM
Staining and sealing have started. I still need to finish molding the edge detail on lower bar surfaces before they get sanded and sealed. I need to stain and seal the uppoer cabinets too, then...
02-17-2014, 04:22 PM
That is Gorgeous!!!!!! I love the built-in sink and the stemware support....
02-17-2014, 03:29 PM
Quick Update with Pics. Got the top bar edges installed and the shelving to the left now has a back and adjustable shelves.
The bar mats showed up on the brown truck, and I am getting close to...
01-31-2014, 04:11 PM
What the hell. I was going to wait to post up progress but here are two pics from night-before-last....
01-29-2014, 09:59 AM
A few updates:
I got the drawwer hardware in and installed. These go quite well with the fridge handle.
I am also starting in hard-core on the desk/bar area. You guys considering using...
01-24-2014, 09:47 AM
ALMOST done with this piece..... I got the beverage cabinet into my office and put together last night. I still need the drawer pulls installed but they are on order. Brushed nickel ones that very...
If you use a Kicker PXiBT50.2 with the optional PXI-RCX you can have a Bluetooth connectivity system with a transom remote... OR use the Kicker PXI50.2 with the PXI-RCX and you can have a dedicated...
01-21-2014, 01:11 PM
Here they are stained
01-21-2014, 01:10 PM
Quick pics update. Drawer fronts built and stained
01-16-2014, 01:37 PM
Go to YouTube and search for BOX JOINT. You will find a lot of videos showing it being done, some on some rather elaborate jigs.
01-16-2014, 01:26 PM
It is actually a box joint. Parallel cuts.
A simple jig on the table-saw makes it possible. Here is the jig I used.
Basically, you use a dado set stacked up to dimension X. You cut two slots...
01-16-2014, 10:27 AM
Refreshment cabinet drawer trays are done. I need to build the drawer fronts, stain and seal them and the thing can then be put together and put in my room.
01-14-2014, 05:14 PM
Actually the far wall has only a temporary foam stack. I am not going to mount that wall with acoustic treatment until I get the TV up.
01-14-2014, 05:10 PM
I flipped through and realized I had not posted semi-final damping material placement yet. David, check this out.
01-14-2014, 01:55 PM
The principle for the room is what is called "Live-end-Dead-end". The basic idea is that you want to absorb all reflections from your ears forward towards the speakers. The front of the room where...
01-13-2014, 03:07 PM
It is a funny thing to say, but I don't want TOO large a TV... :confused:
Let me explain...
The acoustics of the room are paramount, and the viewing distance to the TV is roughly 10-feet only...
01-13-2014, 02:39 PM
I am looking into a 55 or 60-inch Sony. I prefer a flat screen as opposed to a projector, as I need a bright display for when I am working on audio editing and want to use the screen as a monitor...
01-13-2014, 01:36 PM
I don't have the TV yet. I have the satellite box, but no dish...
Results 1 to 25 of 354