Search:

Have you seen the new K2 from Aerial? They just came out with it and I think I'm leaning towards that for my '05...

Just so you know your looking at probably over $2k depending on where you get it shipped. New Dimension does make the factory towers for Moomba. I bought an 05 as well sans tower (previous owner...

Hoop any noticeable difference in wake between the 3 blade and 4 blade?

I would replace it. I used part # SSC15418 from First Choice Marine about $142.00. Its easy to do. I pulled the floor up behind the engine, disconnected the cable from the rudder and tied a rope to...

Yea, I think I agree with you. I picked up some Formula 27 and already have a gel coat repair kit, so I think I'm going to give a shot at filling the holes and see how they come out. If they end up...

Got it. Makes sense. Thanks for your guidance.

Great, thanks for the help. Oh, are the wood dowels necessary or would I be OK if I injected the holes with straight resin. I'm a little paranoid about putting wood somewhere there is none (scared of...

Is Formula 27 an acceptable resin?

I have some existing holes from an old tower and will be trying to mount a new tower approximately where the old one was, but mounts will not exactly match. I plan to fill all the holes knowing I...

Can you guys post some pics of the towers on your boats?

I've found there are ALOT of choices out there. I have a unique situation in that I'm trying to utilize existing holes vs. fill them, which is limiting my options but I still have a few. It really...

I wasnt crazy about the Monster at first but after alot of looking around, and seeing the one here, I like it more and more. Its got a set 70" stance and I'm trying to work with about 61.5" to use my...

Your exactly right, I've learned that as well through all this. Cody explained every tower could have slightly different mounting holes location because of the variance in how one tower cools from...

Well heres something I didnt put much thought into; in checking with two companies both indicate the stance is not a problem, but that their hole patterns on their mounts are different so would...

Cody I did get your message (you had the right #!) and I also did talk to Anthony at Skiers Choice who confirmed my boat was ordered with a tower. Again, thanks for your help. You were very helpful...

Its certainly worth a try, all they can do is say no. Cody recommended I speak with Anthony. Cody also said $3k or better for the tower, with shipping (I'm on the West Coast) wasnt unreasonable. I'd...

Probably got my work cut out for me trying to utilize my existing holes, huh? I take it you like your Big Air tower?

I called Cody yesterday and he is a great guy, very very helpful. I learned they are still producing the exact tower for my boat but they can only sell directly to Skiers Choice, cant sell them...

I appreciate the information, I will give him a call. Thank you.

Yea the New Dimension is what I almost ordered before comparing mounting dimensions, thinking it would be a direct bolt up. Its not. Not to the holes in my boat anyway. I will call XTP next week if I...

Wondering if anybody has been able to obtain an exact fit replacement tower for whatever reason. I have kind of a unique situation in that I obtained an 05 Outback repo that had the tower removed, so...

I have to agree with pogofx. You can pretty easily make a decent wake behind a DD with ballast and plate. Harder to make a decent salom wake behind a v-drive. Outback V is probably a really good...

Sounds like your oil drain hose. Should have a metal clip on the tip to hang on the engine somewhere.

Replaced the steering cable on my 05 Outback. Night and day difference. Pretty easy to do and is most likely the problem.

Oh, ok. Looks nice though.