Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,608

    Default I Have The Power!!!

    I started to post this last night and I had one more picture to upload, then the Moomba site crashed.
    It was probably for the best as I was P.W.I. Posting While Intoxicated. Don't judge! I know I'm not the only one!
    I started getting many of the parts installed over the last week or two.
    Listed here http://www.moomba.com/msgboard/showthread.php?t=9901
    First the pics of the alternator and the external regulator. All the wiring is in and cleaned up. Had to up the wire size from 10 to 4 gauge, and I may end up going to the 1/o depending on temp.
    The alt was so big that I had to modify the cooling hoses to keep the pully fan from hitting. It was pretty technical... ok it was a big azz reusable/adjustable zip-tie. Don't hate, its temporary... maybe.. I don't know it looks pretty custom.
    Enjoy!
    Attached Images Attached Images
    Last edited by newty; 02-03-2010 at 07:43 PM.


    PWI as usual...

  2. #2
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,608

    Default

    Next I had to relocate the heater so I could utilize the space under the bow for the new batteries. That wasn't fun... When I was finally able to get the hoses off, the core ended up draing all over inder the dash and the water from the engine sifoned up there as well until I was able to break the vacuum at the motor disconnecting the exhaust manifold drains. Note to self drain block before playing with the heater.
    Got it done and now I have tons of room for batteries. Turned out better than I expected. This will aid in balancing the boat better and make more room in the storage area.
    Attached Images Attached Images


    PWI as usual...

  3. #3
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,608

    Default

    Lastly some preliminary placement to see what fits where and how to best utilize the front storage area.
    Mounting the new shurepower and the new Punch 1000-1db
    That space is huge if you can optimize it!
    When I get the wire in I'll post up more pics.
    Attached Images Attached Images


    PWI as usual...

  4. #4
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    1,839

    Default

    P.W.I. I like it, good to know i'm not alone, i also B.W.I. but thats only because the winds have died and the water is glass/butter. BTW your lucky to have the boat so close at this time of year and awesome job. I like the orange cooler fan.
    09 21v LAUNCH

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  5. #5
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,819

    Default

    Newty--as always--awsome work!

    P.W.I.---now that is to funny
    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold

  6. #6
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    5,967

    Default

    Looks pretty awesome. i think a few hours and a couple beers is in order so i can get some better looks and ideas. hummmmm...What da ya say lol
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  7. #7
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,608

    Default

    You bring the beer and you got a deal! Just no stealing ideas!

    BTW I like budlight lime!
    Mike how mach carpet do you have left over? I may end up running short by the time this project is done.


    PWI as usual...

  8. #8
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,819

    Default

    Newty, how did you run the battery cables to access the battery on the drivers side?

    I just picked up a battery switch and am going to add a second battery and dont want it on the passenger side--allready have to much crap stored on that side.
    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold

  9. #9
    Join Date
    Feb 2007
    Location
    vancouver, WA
    Posts
    28

    Default

    nice and tight Ryan! caint wait till summer I will be looking for another boat in May

  10. #10
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    5,967

    Default

    Quote Originally Posted by newty View Post
    You bring the beer and you got a deal! Just no stealing ideas!

    BTW I like budlight lime!
    Mike how mach carpet do you have left over? I may end up running short by the time this project is done.
    You got it man lol. Well AWS got me the Grey carpet grrrrr. Brad ordered me a new roll. I should have plenty i got at least a Yard.

    Ill let ya know as soon as i get.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •