Just thought id post this up since there was some question as to weather these pumps would fit in a smaller space. I put a couple differant manifolds togeather just to see how they would work.
Heres the first one
Results 1 to 10 of 26
Thread: Outback V Tsunami upgrade
03-14-2010, 05:26 PM #1
Outback V Tsunami upgrade
Last edited by byronkoz; 03-14-2010 at 05:38 PM.06 Outback V
03-14-2010, 05:30 PM #2
And the one I decided to go with06 Outback V
03-14-2010, 05:31 PM #3
And installed06 Outback V
03-14-2010, 05:34 PM #4
Last edited by byronkoz; 03-14-2010 at 05:37 PM.06 Outback V
03-14-2010, 06:43 PM #5
Looks snuggish in there! Nice work. Thats a great place for those vents.
I noticed you have the same interior speakers as me. Nice choice.
Nice Heiny BTW
Pimped 08'LSV and we surf!http://moomba.com/msgboard/showthrea...highlight=surf
03-14-2010, 07:44 PM #6
Tight fit!!! Not easy to work in such a small area. Excellent job!
Did your boat come stock with GIII? If not, what are you using for drain pumps? Post more pics once you're done
03-14-2010, 08:17 PM #7
Very slick. Good use of your space.My Mom said I'm not allowed to get wet!
03-14-2010, 10:08 PM #8
03-14-2010, 10:20 PM #9
03-17-2010, 03:42 PM #10Senior Member
- Join Date
- Apr 2009
Thanks for the pics, just so you (and anyone else that's interested) know, Tsunami pumps with the long inlet use straight thread, so you can cut that down with a hack saw to 3/4" of an inch and it will still thread into your fittngs fine. That makes it a little easier to fit everything into cramped bilge compartments.
Also, ideally you should use bronze fittings for this application and not brass. Brass will undergo galvanic corrosion at a much faster rate, in fact we've seen brass ball valves fail in less than a year. If it's past the ball valve you can switch to plastic, which will save you quite a bit of weight and money.
Nice install though, can't wait to see the finished product!WakeMAKERS | WakePROPS | WakeSOUNDS | EasyBoatCare