Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,703

    Default AMP and Battery relocation

    Well I am almost finished in moving my AMPs and relocationg my battery's. I have dual Battery's and how they where installed cut into the storage area. I have also redone how my AMP's are located and rewired them. I hate how messey the wiring was and how they where setup. I need to do the final mounting tomorrow but wanted to share a few of the photo's tonight. Should have more in the next few days. I still have to install the remote wire (do not know how i really want to do this right now so any help would be great) and add a lot of zip ties.





    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  2. #2
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,830

    Default

    Jester, Looking good, can't wait to see the final install as i am designing in my head how to re-arrange my amps and possible batteries
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  3. #3
    Join Date
    May 2008
    Location
    Minneapolis
    Posts
    507

    Default

    I cant wait to see how this turns out
    2007 Outback V

  4. #4
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,703

    Default

    ok Amps have been installed. I still have to do cable cleanup and run the power cables to the battery's but that will take no time at all. You can see the gap where the second batter goes. I had to pull it out to install the Amp setup.







    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  5. #5
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,703

    Default



    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  6. #6
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,830

    Default

    Jester, That is a nice install. Is the board attached at three spots or four to the boat? Tight space isnt it.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  7. #7
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Tight space for sure! wonder if people with the LSV's and XLV's know how good they got it?
    I wasnt able to fit all 3 of my amps in there so I had to put my sub amp under the drivers side. I am able to fit all 3 of my batteries in there though.

    Nice job Jester, looks good.
    06 Outback V

  8. #8
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,703

    Default

    Quote Originally Posted by jmvotto View Post
    Jester, That is a nice install. Is the board attached at three spots or four to the boat? Tight space isnt it.
    Right now the board is attached in three spots. I am trying to find out if i need to attach it in 4 or not and how i will do it if it comes to that.
    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  9. #9
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,830

    Default

    Quote Originally Posted by byronkoz View Post
    Tight space for sure! wonder if people with the LSV's and XLV's know how good they got it?
    I wasnt able to fit all 3 of my amps in there so I had to put my sub amp under the drivers side. I am able to fit all 3 of my batteries in there though.

    Nice job Jester, looks good.
    Byron you got an pics of your amps in the "hole"

    lsv and xlv got it good, not sure why the cut out was not applied to all boats?
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  10. #10
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Yeah not the best but this is a pic before I finished wiring them. These are my tower and interior amps.
    Attached Images Attached Images
    06 Outback V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •