Results 1 to 10 of 86

Threaded View

  1. #11
    Join Date
    May 2010
    Location
    Terre Haute, IN
    Posts
    266

    Default Prop Shaft Bolts

    I started this process. Was worried about not being able to get it done before leaving on vacation so I'm gonna put it off till I get back. I was working on doing fluid changes and such and noticed this forum so thought I would look at this. Well when I looked at the bolts holding the two shafts together they were loose and you could spin them by hand. I know someone else on here had the same problem and replaced the bolts. I took a picture of the bolts so everyone could see. The lock nuts could be spun off by hand so they weren't working that well anymore either. The threads on the bolts were pretty much shot from being loose. Also, my bolts were 2 1/4" long for anyone that wants to know if they replace them.
    Attached Images Attached Images
    2006 Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •