Thinking about getting the sub box from Brian but I have an xlv. I emailed him some measurements to see if it would fit. He hasn't had a chance to reply to my email so I figured I ask if you remember what your measurements are. This is what I sent him:
Ok see if this makes any sense.
from were the floor of cock pit starts to base of foot well is 16" Deep
Its 27 inches wide from left side to beginning of cup holders outer wall
Cup holders are 7" wide so a total of 34" wide if you measured from left wall to right wall if you measured from the top of cup holders.
It is 9 1/8" from the lip of the back cup holder (closest to foot well) to the foot well if measured from top of cup holders (foot well is at a slant)
The foot well measured 13 1/2" tall by 5 1/2" wide at top
And its 22 3/4 from floor to the dash (under steering wheel) its at lot higher if measured behind the dash area.
Results 1 to 3 of 3
04-28-2010, 04:56 PM #1Member
- Join Date
- Apr 2007
Question for mmandley or anyone else
04-28-2010, 06:17 PM #2
Yes i understand all those measurement locations. Right now my boat is in the driveway covered up so i will need to get out there and measure it. Off the top of my head id say yes the box will fit because from what i have seen the XLV helm is taller and wider. The different will be the fasica panel. That will have to be made to fit the larger opening.
Ill get with Brian and see what he has to say, ill nudge him to make sure he sees this thread or something lol.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
6 SX65M Cabins
6 XM9 Towers
1 XI Big 15 Woofer in a custom Fiberglass box
1 XI 1K Harpoon
2 XI 800.4
1 XI 2500.1
2 Interstate 2400U 6V Golf Cart Batterties
Custom 1 Off Evolution Cover
04-29-2010, 08:43 PM #3
Brad - sorry for the delay in getting back to you. Been getting pulled in to many different directions. I'll confirm details and give you an up or down by Monday.
Same for you Chad!