Bow stop/front roller

[bslide]

Having a problem with our bow stop. Its leaving black markers on the bow. Looking at getting a new one. Any recomendations?

[jmvotto]

Try overtons

http://www.overtons.com/modperl/prod...r&merchID=4005

[Razzman]

Definately get the Stoltz Ultimate Bow Stop Roller. I've had it two years without a mark on it or the boat! I've used Stoltz rollers on the last two boats and the difference between them and all the others is the material, it's silicone impregnated or something because it super slick!

[bslide]

That is exactly what I'm looking for. Thanks for the info.

[cab13367]

Razz,

I need one of those too! Is the 3" or 4" the right one for our trailer? Or do you remember?

Thanks,

Al

[moombadaze]

Razz,

I need one of those too! Is the 3" or 4" the right one for our trailer? Or do you remember?

Thanks,

Al

Al, grab a tape measure and measure the width of where the roller goes-thats the size you will need. I did mine with the stoltz after the boat buddie crapped out-it was 4"

[cab13367]

Al, grab a tape measure and measure the width of where the roller goes-thats the size you will need. I did mine with the stoltz after the boat buddie crapped out-it was 4"

Thx. I'm not near my boat or trailer and wanted to order it this afternoon.

[gus 08 mobius lsv]

this looks like the exact roller i have on mine would they have started using these ones on my trailer now or is it just similiar to those but not the stoltz?

[bslide]

Well I got an 05 xlv and it has the 3"

[Razzman]

I don't remember so I went and looked. My bracket measures 3 1/8" between the arms with the roller in place. I looked here to verify, Stotlz Industries Ultimate Bow Stop. A 4" unit is HUGE so there's no way it could be a 4".