Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Racks

  1. #1
    Join Date
    Jun 2008
    Location
    Bellevue, Wa.
    Posts
    31

    Default Racks

    Anyone out there no of any surf racks out there that will fit the oval tower crossbars like the stock wake racks? Any racks that you particularly like?

  2. #2
    Join Date
    May 2008
    Location
    Ottawa, ON
    Posts
    28

    Default

    http://motors.shop.ebay.com/duane828...1&_from=&_ipg=

    Check these out. They have a few differant racks that fit.

  3. #3
    Join Date
    Jun 2008
    Location
    Bellevue, Wa.
    Posts
    31

    Default Thanks

    Thank you for the info. This is exactly what I was looking for.

  4. #4
    Join Date
    Apr 2010
    Location
    Sheridan, WY
    Posts
    70

    Default

    Does anyone have these on there tower? I was wondering if you can fit 2 wakeboards and then a surfboard in this rack on the same side?
    '07 Moomba Outback V.

  5. #5
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    3,931

    Default

    Sweet - that is exactly what I'm looking for as well. Thanks Frank.

    jeffrogge, that seems like it would be too tight of a fit unless you have a really thin WB and surf... I'm thinking you'd be crushing them to fit!
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  6. #6
    Join Date
    Apr 2010
    Location
    Sheridan, WY
    Posts
    70

    Default

    Sorry I didn't write that very well. I mean does anyone know if you can put a wakeboard in each slot of the standard wakeboard racks that come with the tower and then add this rack to the other horizontal bar on the tower and fit a surfboard in it without the bindings from the wakeboard causing an issue?
    '07 Moomba Outback V.

  7. #7
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    3,931

    Default

    Oh I gotcha - I have three horizontal bars on mine, my wakeboard racks being on the middle one. From the middle to the top bar is 14.5" center to center and from the middle bar to the bottom bar is 17" center to center.

    I think that would be plenty of room for bindings to fit, staggering them a little if you have to.

    My preference would be to mount this up high and out of my line-of-site but that top bar is much shorter and since the surf is longer than the wakeboard that may not work too well. I may just swap and mount it on the mid bar and put the factory wakeboard rack up high with one of the smaller kids boards up there and call it good.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  8. #8
    Join Date
    Jun 2008
    Location
    Bellevue, Wa.
    Posts
    31

    Default bought racks

    I bought the racks suggested by Frank Smith. They were shipped promptly and were of pretty good quality. The only problem was that the surf board did not fit. The bigger slot in the rack is not quite 2" and I knew it would be close. I have a Grindwater fiberglass board and it is too thick to fit in the rack. I guess I am on to plan B.

  9. #9

  10. #10
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,016

    Default

    Quote Originally Posted by nibots View Post
    I bought the racks suggested by Frank Smith. They were shipped promptly and were of pretty good quality. The only problem was that the surf board did not fit. The bigger slot in the rack is not quite 2" and I knew it would be close. I have a Grindwater fiberglass board and it is too thick to fit in the rack. I guess I am on to plan B.
    Which Grind Water board do you have and how do you like it?
    Al

    2006 Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •