Results 231 to 240 of 357
11-12-2010, 05:12 PM #231Al
2006 Mobius LSV
11-16-2010, 07:02 PM #232
I put an inspection cover towards the rear of the ski locker area. The foam was a little wet but there was no standing water at the bottom. I still get quite a bit of "squish" sound at the front of the locker, but for some reason it's not translating to any water a couple of feet to the rear.Dan
08 LSV Mods
12-16-2010, 02:01 PM #233
For those that have installed a deck plate in the ski locker, are you guys planning on removing the foam each time you suck water out? or just leaving that little bit of foam out completely.
I have drilled the hole and removed a circular piece of foam, and am in a multi-day process of removing water. I'm just wondering if I should leave the 4" circular piece of foam out for good so I have easy access down to the hull by just unscrewing the deck plate, or if I should put it back in and remove it each time. Just seems like it'll be tough to remove each time through the deck plate.'13 Mobius LSV
'05 Mobius LSV - Sold
12-16-2010, 06:55 PM #234
12-16-2010, 09:57 PM #235
I left it outDan
08 LSV Mods
12-17-2010, 07:34 AM #236
left if out alsoHey, Its Moomba time
13 Mobius LSV
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
01-02-2011, 08:38 PM #237Junior Member
- Join Date
- Jan 2006
You can add me to the list. 06' LSV. I actually noticed this a couple of years ago. Talked to my dealer about it and was assured nothing was wrong.
02-02-2011, 11:03 AM #238
I definitely have the issue as well, i was not even aware of it until i put the boat away for the winter.. like others the fiberglass is so thin in the locker I actually have a dime sized hole in the locker bottom i noticed when I pulled out the matt that sits under the ballast... the foam was full to the hole with water... i shopvac'd as much as i could but my boat is still soaked.. not sure what to do here.
whats weird, is there are square patches in the floor that are dull and rough feeling, almost like they were fixed previously.. now I am the second owner so who knows..
either way, very bad fibreglass work.
boat year and model in sig.
Last edited by spyder; 02-02-2011 at 11:26 AM.2006 Moomba Mobius LSV
Lake: Rice lake, Ontario
Stereo: Kenwood KMR-550U
Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"
If you're from the area and want to surf, send me a PM!
02-07-2011, 10:39 PM #239
add me to the list as well. i just read all 24 pages of this, wow. i need a beer. i noticed that my ski locker was always wet, didnt think much of it at the time but this explains it. looks like ill be drilling a hole and shop vacing in march while i install my new exile system.
has anyone tried the bilge pump idea yet?David
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
02-12-2011, 04:34 PM #240Member
- Join Date
- Jun 2007
- Monroe, LA
I just checked mine also after reading this thread. My 07 Outback V is was pretty squishy.
The water is probably at least three years old in there. I hope the cold weather didn't do any lasting damage. The outside of the hull looks find as does the ski locker. The boat is always properly winterized, but had I known this water was there, I, like everyone else here, would have already removed the water. I'll be sure to add this to my winterization checklist next year.2007 Outback V