Page 18 of 36 FirstFirst ... 8161718192028 ... LastLast
Results 171 to 180 of 355
  1. #171
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    374

    Default 2003 Supra Launch SSV

    Im not sure how many this will apply to but I do not have the walk thru bow. I have the play pen setup. This weekend I am going to drill a hole and see how deep it is from the bottom of the locker to the bottom of the boat and then put in a deck plate. How many other people have the play pen setup besides me?

  2. #172
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,493

    Default

    Quote Originally Posted by Razzman View Post
    Very good JM! Keep us posted.
    My dealer got back to me and went to storage to ease my concerns. He found that doing the walk and squish test that mine is fairly dry. he even heard the "crunching sound" of dry foam. also stated that there was a small void near the bow, but was somewhat covered with excess glass and sealant ( probably not on purpose),so the void is about the size of a fist.

    Thanks to Quinn, for going out of your way to ensure some piece of mind in the off season and during your wind down busy season up North for the winter

    FWIW i use my test plug in the ski locker drain most of the season.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  3. #173
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,707

    Default

    jm, glad to hear you have a dry hull
    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold

  4. #174
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,707

    Default

    pulled the floor up tonight and found about 2" of water under the gas tank-vacumed that dry and got some more water out from under the ski locker.

    one good thing--got to listen to some music and drink a beer at the same time
    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold

  5. #175
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,493

    Default

    when i did my ballast project this summer i pulled the floor. no water in the gas tank area either, guess i am just lucky
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #176
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,261

    Default

    Looks like most on here with problems have the LSV and not the Outback V so that could be some of it?
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  7. #177
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,759

    Default

    Quote Originally Posted by viking View Post
    Looks like most on here with problems have the LSV and not the Outback V so that could be some of it?
    I was wondering the same thing. Any 06-09 OBV owners having this issue?

    Wonder if this was addressed in the 2010 or 2011 LSV's?
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  8. #178
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Quote Originally Posted by wolfeman131 View Post
    Wonder if this was addressed in the 2010 or 2011 LSV's?
    Read earlier in the thread, a 2010 was shown without the issue.
    2007 Mobius LSV

  9. #179
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,759

    Default

    Thanks Razz. I've been trying to keep up with this thread, but missed that it looks like the 2010's are OK.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  10. #180
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    374

    Default cut open

    I bought a 4 inch screw lid today and went ahead and cut the hole in the ski locker. Remember I have the playpen seating but it should still be the same basically. Water was on top of the foam as soon as I cut into the fiberglass. I then removed the foam all the way down to the bottom of the hull. As I expected the water kept coming. I used the shop vac and sucked up about 2 gallons. I am going to let it sit and go back and check it tomorrow before putting the lid on it. I will post some pics as soon as I can figure out how to shrink the file size on this new Mac Book.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •