Page 1 of 2 12 LastLast
Results 1 to 10 of 38

Hybrid View

  1. #1
    Join Date
    Feb 2009
    Location
    Wausau, WI
    Posts
    436

    Default New Seadek & Hydroturf

    I thought I would post some pictures of my Seadek pad (Storm grey over black). I am also adding pieces of Hydroturf to areas of the boat. I started with the inside of the glovebox.



    Matt

    2003 Outback, Assault EFI, (6) Polk Audio DB651s, JL Audio M6600 amp, JL Audio M1700 amp, JL Audio 10w6v2 subwoofer

  2. #2
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,273

    Default

    Is that Hydroturf "molded" diamond or "cut" diamond?
    Looks good!
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  3. #3
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,630

    Default

    Cut. I've used it all over my boat. I love it. I'm half tempted to do my entire floor in the stuff. Great stuff.


    PWI as usual...

  4. #4
    Join Date
    Feb 2009
    Location
    Wausau, WI
    Posts
    436

    Default

    Actually newty its Molded Diamond. I got samples of both, cut and molded diamond, and they are pretty close, the groves in the molded are smooth and more defined. Really like that they send out samples of their product. Much easier to decide color and texture with a sample in hand.

    I got the turf with the pre-applied glue as well, so just cut to shape and size with scissors, then peal and stick. I did take some medium-course sand paper to the edges to get rid of the scissor marks. Not sure if I will put any on the top deck, but I am planning on doing the floor of the front where it is not carpeted. Then I will see how much I have left.
    Matt

    2003 Outback, Assault EFI, (6) Polk Audio DB651s, JL Audio M6600 amp, JL Audio M1700 amp, JL Audio 10w6v2 subwoofer

  5. #5
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,273

    Default

    Just off hand..........how does it compare in price to a sheet of seadek? I'm wanting to do the floor in the bow, transom, and then along the tops of the gunwale for stepping in and out of the boat.
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  6. #6
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    357

    Default

    I see three scenarios here:

    1-You have a really nice wood floor in your garage.
    2-You don't have anyone to explain your actions to (swim deck in the dining room?)
    3-Your significant other is very understanding/ supportive.

    Either way, nice choice on the seadek and I like the hydroturf. I am thinking of all the ways I could use that stuff on the boat.
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  7. #7
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,630

    Default

    Quote Originally Posted by Hoopskier View Post
    Actually newty its Molded Diamond.
    Like I said Molded Diamond... kinda hard to tell unless you have it in front of you but I can see how the lines are a little smoother now that you say that.

    I've got strips of the stuff on the gunwale and on the transom to protect from traffic and boards. I'm trying to decide whether or not to use it on the floor. I If I did it would be in black an I don't know if it would be too hot in the sun. The pad didn't seem to heat up too bad last summer.


    PWI as usual...

  8. #8
    Join Date
    Nov 2009
    Location
    Murfreesboro, Tennessee
    Posts
    206

    Default

    Quote Originally Posted by Hoopskier View Post
    I thought I would post some pictures of my Seadek pad (Storm grey over black). I am also adding pieces of Hydroturf to areas of the boat. I started with the inside of the glovebox.



    Looks good.


    Quote Originally Posted by newty View Post
    Cut. I've used it all over my boat. I love it. I'm half tempted to do my entire floor in the stuff. Great stuff.
    I need carpet this year and been thinking very seriously about doing the entire floor in mine as well. I would like a custom seadek floor, I really like the faux teak look but dont know how it would look.
    99 Moomba Outback with lots of work

  9. #9
    Join Date
    Feb 2009
    Location
    Wausau, WI
    Posts
    436

    Default

    Here is the bow floor done with the same grey molded diamond pattern.


    The downfall of doing a piece this large is getting the lines straight. Now, what to do with the rest of sheet of material?
    Matt

    2003 Outback, Assault EFI, (6) Polk Audio DB651s, JL Audio M6600 amp, JL Audio M1700 amp, JL Audio 10w6v2 subwoofer

  10. #10
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,597

    Default

    That looks great! I wish my whole floor was that material...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •