Another Group Buy for SeaDek Pads?

[07 lsv]

I am planning to buy a new seadek pad for my swim platform as I am sick of the black marks getting tracked in on my vinyl. I am working on getting measurements for the pad on my boat, but I figured I would see if enough people were interested for us all to save 20% - this puts a $220 pad at $176. If there is not much interest, then I will probably just order mine.

I see that they have new bimini blue that seems to look close to the blue on my boat that I am interested in. The color is not listed under the swim pad selection but can be ordered via phone. The blue is currently available as a top color and will be available as a bottom color in the next few months.

Anyone interested in a group buy?

[rdlangston13]

if i can get a custom design on it i would be interested

[sandjclark]

I am interested!

[jmvotto]

you can now get a SeaDek one-piece pad in faux teak! www.seadek.com

Ed, I think that one will be a little extra..great dek though.

[moombadaze]

The more I see that faux teak pad the more I like it, best of both worlds with it, looks, and soft on the knee's

[Copen80]

07 lsv...I sent you a PM with a couple questions...

[Sea N' Things]

I am interested in the group buy , Thx!

[07 lsv]

So, I sent an email to Jason about the group buy and hadn't hear anything back yet, so I decided to try calling and asked for him. The lady that answered the phone asked who I was and what I wanted, so I told her...She the proceeded to tell me that they have put group buys on hold because they have had too many people that take too long to get their payments in. They don't start processing the order until everyone has paid. I am hoping that Jason gets back to me with better news. I am starting a new thread on this and elaborating more.

[achilles50]

I also am planning to buy a Sea Dek pad for my 2008 LSV. I would be interested in the group buy if that comes together. What is the best way to remove the orginal black non-slip that came on the platform?

[mmandley]

I also am planning to buy a Sea Dek pad for my 2008 LSV. I would be interested in the group buy if that comes together. What is the best way to remove the orginal black non-slip that came on the platform?

Leave it in the sun a couple hours or use a heat gun on low and use plyers and a plastic putty knife.

Start at the edge and once you get it started use the heat gun to soften the glue as you pull it off.

Clean with mineral spirits, goo gone, or fuel as some have used lol.