We know a lot of you have been buying used ballast bags lately, and you may be swapping out fittings on them
Someone tried Wakemakers tip on removing glued fittings today.
Works like a charm, but you can't be timid about it. You have to be determined and a little brutal with it.
Don't worry, you won't hurt anything.
They recommend heating the joint for at least 5 minutes, he found that 7 minutes with a 1600 watt hair dryer was the ideal time.
And it really does "pop" when it breaks loose
Results 1 to 10 of 21
Thread: Removing Glued Fly High Fitting
03-24-2011, 06:16 PM #1
Removing Glued Fly High Fitting09 21v LAUNCH
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies