Removing Glued Fly High Fitting

[moombadaze]

um, i dont even know what to say about that one.

what did ya order, was the 1100 not enough ?

[wolfeman131]

Ordered IBS, 3 check valves, Y valve, lots of fittings and hose.

So, going with 1,100 in reg side locker with 370 teed to it under the seat. 750 in goofy side with Y valve mounted about transmission cover to switch pump to IBS and stock center. So, that's some 2,570 lbs for the regular side and 1,850 lbs for the goofy ones.

While I'm thinking about it, a big THANKS to mandley who refused to leave wakemakers office until Spencer called me and also to Spencer for getting me hooked up!

[E4NASH]

Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

http://www.youtube.com/watch?v=qpW_x...7&feature=plcp

[jmvotto]

Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

http://www.youtube.com/watch?v=qpW_x...7&feature=plcp

Yep, I followed it to a tee and went smoothly for six fittings.... Thought about using the heat gun, but did not want to ruin bags

[jpetty3023]

Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

http://www.youtube.com/watch?v=qpW_x...7&feature=plcp

Why did you have to remove the fittings E4? When I got my 750's about a month ago it was just an easy plug and play from boat to the fitting that were shipped with my bags. Am
I missing something here?


Sent from my home phone..

[E4NASH]

I bought the Moomba upgrade kit from Wakemakers and the bags came without the fittings so I used the fittings that were in my existing 400s. I too thought it was plug and play by the description on the site but it wasn't.

BTW: I got the stickers and will be shipping them out as soon as I can get big enough envelopes to mail them in. They should go out either tomorrow or Wed.


Sent from my iPhone using Tapatalk

[jpetty3023]

That's the same thing I got brotha, got all kinds of fittings in the box. It was kind of under/middle of bubble wrap. May want to check your box? Even got those fancy vent fittings everyone been talking about. All came with the Moomba upgrade I ordered


Sent from my home phone..

[jmvotto]

That's the same thing I got brotha, got all kinds of fittings in the box. It was kind of under/middle of bubble wrap. May want to check your box? Even got those fancy vent fittings everyone been talking about. All came with the Moomba upgrade I ordered


Sent from my home phone..

i think he was talking about the quick release fittings. bags come standard with quick twists and plugs

[E4NASH]

Right...I needed the quick release fittings.


Sent from my iPhone using Tapatalk

[mmandley]

While I'm thinking about it, a big THANKS to mandley who refused to leave wakemakers office until Spencer called me and also to Spencer for getting me hooked up!

Anytime man, i have the direct connect with Exile and Wake Makers as i goto there shop almost every week to shoot the shiz and keep up to date on the newest stuff commming out. Also just pretty good friends with everyone there.

Yesterday after i helped you i went with Brian to Sampson in Washington and we unloaded 100 pairs of XM9s from the container, and then loaded it in the Exile trailer. Headed back to OR so he could get some orders out.

Basically what Wolf does with Atlanta Marine i do with Exile and Wake Makers