anyone have photos of how and where you placed the wetsounds eq., please let me know. currently, exploring options. have the unit in hand. thanks
Results 1 to 5 of 5
Thread: adding a wetsounds 420
04-30-2011, 10:14 AM #1Junior Member
- Join Date
- Aug 2009
adding a wetsounds 420
04-30-2011, 10:31 AM #2
i cleaned the wiring up after this shot was taken. i took two pieces of like 5" x 1" x 1/8" aluminum i bought at home depot and bent L brackets out of them and drilled a series of holes in them. crawled under the dash and found a couple of places in the fiber glass where i could fit a few small screws through the holes in the brackets into the fiber glass. i then placed a block of HDPE plastic between the brackets and screwed that into place, then mounted the WS420 with the brackets it came with to the HPDE. I can get more pictures of it for you when i get home in a couple of weeks
Last edited by rdlangston13; 04-30-2011 at 10:33 AM.David
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM7, Exile SXT65Q, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
04-30-2011, 10:46 AM #3
Not a wetsounds but...
08 LSV Mods
04-30-2011, 12:51 PM #4
I still think that install is oh so slick.My Mom said I'm not allowed to get wet!
04-30-2011, 01:20 PM #5
Thanks! I'm clearly proud of it since I spam that picture anytime someone even mentions EQ.Dan
08 LSV Mods