I got an 2003 outback last fall and the entire sound system was sitting on the floor behind the passenger seat. Other than this, the boat seems to be in excellent shape. Before I put the boat away I removed everything, to get ready to mount and loacte it properly and neatly. So here's a log of my solution to mounting and locating the parts.
Results 1 to 10 of 17
Thread: re-locate sub and amps
-
05-21-2011, 02:14 PM #1
re-locate sub and amps
Last edited by rsinger; 05-21-2011 at 02:20 PM.
2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 02:19 PM #2
Sub woofer
Pictures of the sub
Last edited by rsinger; 05-21-2011 at 02:33 PM.
2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 02:48 PM #3



2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 02:49 PM #4



2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 02:49 PM #5
2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 03:13 PM #6
AMP PICTURES



2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 03:13 PM #7



Last edited by rsinger; 05-21-2011 at 03:18 PM.
2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 03:18 PM #8

Not quite done yet. Sub will be raised, and wiring for amps will be tidied up.2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron
-
05-21-2011, 03:28 PM #9
Looks great what type of finish is that on the rack and box?
-Mark
02 Mobius LSV - GIII Ballast - Kicker 6500.2 Six Pack powered by 650.4 - Polk cabins, 10" L5 powered by Kicker 750.5 - Perfect Pass wakeboard pro
"Hey you only live once"
-
05-21-2011, 04:05 PM #10
sort of a velvet finish. Got it from local fabric store. Only place I could find something that matched existing carpet. Fabric in hold area should be ok. Only have small concern about speaker cover with possible exposure to sun and fading.
Trial and error. We'll see what happens after a few years.2003 Outback AND 2006 Supra Launch 21V
What do I do now?
Ron

Reply With Quote