Results 1 to 10 of 19
Thread: another heater install help ?
05-22-2011, 07:12 AM #1
another heater install help ?
I have the conncetions at the engine.. I am having trouble mounting the core unit to the back of the hump. I drilled my hose hole toward the walk way. so i have to push the core slightly toward the hull side.. I can't seem to get the screws to bit into anything toward the hull. very close to the chase.
My thought was to build a mini "amp board" carpet it and screw it to the back of the hump then mount the core to the board?? thoughts.
because of the height restriction of the OBV 07 i have to do all the work from the steering wheel side which is very very tight..
what screws have people used and do you pre drill? i am using a flexible drill driver tip, but what a pain
i spent almost 2 hrs trying to get this mounted
evrything seemed to be flying along until this snag...A Day at the Lake...Priceless
A Day in Powder...Endless
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold