Results 1 to 9 of 9
  1. #1
    Join Date
    Mar 2011
    Location
    Houston, TX
    Posts
    238

    Default Flush Kit Installed

    I have been running in brackish water so I installed a flush kit. It was very easy. I thought I would share a couple pictures with the board.

    Cost: $65
    Install Time: 15 Minutes



    Attached Images Attached Images
    2007 Mobius LSV
    Boat Pic

  2. #2
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,602

    Default

    Nicely done! This will be great reference for others that want to do this install.

  3. #3
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,706

    Default

    Where did you buy it at? Have you tested it out yet? If so how well does it work?
    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  4. #4
    Join Date
    Mar 2011
    Location
    Houston, TX
    Posts
    238

    Default

    Quote Originally Posted by jester View Post
    Where did you buy it at? Have you tested it out yet? If so how well does it work?
    I've only used it once and it worked well. I'll be using it again on Saturday.

    I bought from Amazon:
    http://www.amazon.com/gp/product/B00144D86Y
    2007 Mobius LSV
    Boat Pic

  5. #5
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,187

    Default

    it looks just like the one i got installed at rinkers. ran my boat in the driveway for half an hour and it never got hot
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  6. #6
    Join Date
    Apr 2006
    Location
    Live in Little Rock, Ar
    Posts
    38

    Default Flush Kit

    Does this cause the impeller to burn out? This looks like it by passes the impeller. I can't tell from the picture, maybe you installed it just after the strainer up from the raw water intake and it still has to go through the impeller? Any help would be appreciated.

  7. #7
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,602

    Default

    Quote Originally Posted by cfdrews12 View Post
    Does this cause the impeller to burn out? This looks like it by passes the impeller. I can't tell from the picture, maybe you installed it just after the strainer up from the raw water intake and it still has to go through the impeller? Any help would be appreciated.
    He has it installed right after the raw water intake. From there it goes thru the vdrive and on to the water pump, so no impeller issues.

  8. #8
    Join Date
    May 2010
    Location
    Terre Haute, IN
    Posts
    272

    Default

    I've thought about doing this. Thought it would also be nice to actually run a hose from the flush kit to the back of the boat so that you would hook the hose up to the back of the boat to flush it. I would love this so that I don't have to crawl under my boat everytime I need to flush it.
    2006 Mobius LSV

  9. #9
    Join Date
    Mar 2011
    Location
    Houston, TX
    Posts
    238

    Default

    Update: I have used this 3 times now and it works great. Turn the water on, check for hose kinks, then fire the boat up. It's simple and and works well.
    2007 Mobius LSV
    Boat Pic

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •