In post #3 of this thread, http://moomba.com/msgboard/showthread.php?t=8354, brain installed the eznets on this hump. I just wanted to confirm that you can drill and screw into this without damaging anything? This doesn't go into an area that involves water does it? Thanks.
Results 1 to 2 of 2
-
06-24-2011, 04:20 PM #1
Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 696
Hump on inside of hull in battery compartment
2006 Outback V - Gone
2008 LSV - Gone
2013 other brand
-
06-24-2011, 10:40 PM #2
Senior Member
- Join Date
- Jun 2009
- Location
- South West Colorado
- Posts
- 197
It is there to allow airflow from the intake down into the hull and back to the engine area. I did the same as brain and installed the eznet on there. No problem.
'08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.
Reply With Quote