Followed SandM's footsteps so to speak and gave my trailer some long overdue lovin. I had a dent in the fender and paint scuffed off for, I'm ashamed to admit, a couple years. Always meant to get to it and I finally did.
I was worried about finding a good paint match. Looked around at auto shops, paint shops, was going to have a custom mix done. Then of all things would you believe that John Deere Yellow is a PERFECT MATCH!
Finished it off with some new hydroturf to replace the old sandpaper type skid steps on it that were looking pretty sad.n Also swapped out the grommet from the light to the correct/matching one that should have been there all along.
Results 1 to 10 of 12
Thread: Long overdue trailer lovin
07-02-2011, 01:46 AM #1
Long overdue trailer lovinAt the time it seemed like a good idea...
07-02-2011, 01:51 AM #2
My steps on the rear of the trailer were looking pretty sad as well as the paint on the guide poles. Gave them some lovin as well. Touched up the paint and new pads/covers for the guide poles should be arriving shortly.
Used the same hydroturf to replace the sandpaper stuff. I thought about going with SeaDek but decided since these steps take a lot of abuse that the hudroturf would hold up better.
I thought about swapping out all the lights and going full LED on the trailer but I just couldn't justify it since all the lights still work just fine. For now anyway...At the time it seemed like a good idea...
07-02-2011, 01:57 AM #3
This would have been my fifth year running with no spare of any kind. None whatsoever! Figured my luck would run out eventually so I got a spare and tire. Went with just a basic Fulton spare mount and a plain white modular wheel. I'm thinking of throwing a tire cover over it so I didn't care much if it was chrome since you'd hardly see it. If the Fulton mount starts to weather I may try painting it with the good old John Deere yellow. I've heard you can't get paint to stick to galvanized metal but I think this thing is zinc plated?
I guess the white wheel doesn't look too bad with the rest of the white on the boat.
Last edited by bergermaister; 07-02-2011 at 02:01 AM.At the time it seemed like a good idea...
07-02-2011, 02:31 AM #4
Lookin' good. There's a reason they call it a "spare". Don't sweat it. I got a UV cover off ebay for $10 just to protect the rubber on the spare.My Mom said I'm not allowed to get wet!
2000 Outback LS (sold)
07-02-2011, 08:50 AM #5
think I have that same spare mount--painted mine black 2 yrs ago and have not noticed any issue's yet with itHey, Its Moomba time
13 Mobius LSV
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
07-02-2011, 10:32 AM #6
Nice work Berg, I think the white spare because of it's location actualy looks better then a chrome one would.
I gave my trailer some love last year with all the new tie downs, this year she's getting the Fulton2 jack. Maybe next year she can get some new wheels if I replace the tires, I am going to rotate them this year as the front axle set are pretty worn and scuffed on the edges from turns.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
07-02-2011, 11:50 AM #7
Berg - Nicely done! - Deerfield2007 Outback
2012 RAM Crew Cab
2015 Subaru Forester
07-02-2011, 05:43 PM #8
Looks brand new. Great work! John Deere Yellow...............that's crazy
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
07-04-2011, 10:29 AM #9
looks good'06 Supra Launch 20SSV-gone but never forgotten
07-05-2011, 10:17 PM #10
Nice work, makes it look like new! I have a 2004 Mobius LSV. I need some paint work. I wonder if myYellow is the same John Deere or if there was any color change between those years?2004 Mobius LSV