Well I blew my Samson Doubls 7s ( focal speakers) so I am ordering 4 xm7s. Now I have 2 amps I can use.
Should I run my kicker 225 x 2 at 2 ohms rms OR
My MTX mono class d 1500 watts at 1 ohm and wire the 4 xm7s all parallel to get 1 ohm mono?
What would be better??
Results 1 to 4 of 4
Thread: Exile xm7s
07-12-2011, 11:08 AM #1Senior Member
- Join Date
- Oct 2009
- Tumwater, WA
Exile xm7s2006 Outback V, Alpine CDA-118M, 2 alpine MC20's, Polk Cabins, 2 Exile XM7s 2 SXT65s (tower), Memphis Mojo 12" Sub in custom downfiring ported box, Kicker 2500.1, Exile Harpoon, JL M6450, WS-420.
Acme 1433, 750lbs Sacs in Rear, GG 1180 (fills to about 700) Sac in Center Locker, 650 lbs Nose bag.
07-12-2011, 04:36 PM #2
Is the MTX mono amp capable of reproducing anything above 200 HZ or so? Since it's designed to drive a sub the frequency range it can reproduce may be limited so it would not sound good driving full range speakers.Al
2006 Mobius LSV
07-13-2011, 06:57 PM #3
Go with the Harpoon.
The Kicker is not enough to sufficiently power two pair of XM7 IMO.
The MTX would have to be a full-range amp to even be considered.
07-13-2011, 07:22 PM #4
Morgan - Harpoon all the way. If you want a tuning chart for the Harpoon amplifier take a look on our site or shoot me a PM.
The monoblock is for the sub.
The kicker could be used for 1 pair very well. but would under power two.
The harpoon will give you lots power for 2 pair of xm7's