Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2008
    Posts
    25

    Default Wakeplate Question

    08 LSV, Reference picture. Is this in the all the way down position? (because that is as far as it will go)
    Attached Images Attached Images

  2. #2
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    5,967

    Default

    yup thats as fare as it goes. it goes slightly lower then the rear of the boat. And when you put it up it only goes about 2 inches up.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  3. #3

    Default

    I have a 2000 mobius V with a wakeplate that looks just like this and I don't understand what it is meant to be used for. When I lower it down to 50% I have a hard time seeing any noticeable difference, except that it seems at 100% the boat planes out a bit better... what is the reason to set it to anything less than 100%?
    2000 Mobius V

  4. #4
    Join Date
    Sep 2008
    Posts
    25

    Default

    bret, I think it's purpose is to shape the wake. When mine is all the way down, the wake is noticeably steeper with a sharper edge. It's real handy if you're wakesurfing too, cleans the wave up and gets alot of the washout gone.

  5. #5

    Default

    Ok so all the way down is probably 100% and all the way up is 0%... I'll have to maybe try it at 0% this weekend as I am still a beginner.
    2000 Mobius V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •