Page 5 of 5 FirstFirst ... 345
Results 41 to 45 of 45
  1. #41
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    948

    Default

    Krak... Pm me, might take them!
    -Jake

  2. #42
    Join Date
    Feb 2012
    Location
    St. Albert, Alberta, Canada
    Posts
    170

    Default

    Quote Originally Posted by KRAK View Post
    Can some one please post pictures of how they attached the top of the vertical angles?
    Please.......
    2010 MOOMBA LSV
    340 CAT
    ACME 1235
    3100#'s




  3. #43
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,786

    Default

    It doesnt show it as i tink i took this pic before i mounted it to the top rail. I assume you mean how do you attach it to the factory cross brace above the engine. I drilled threw it and into the angle bracket ( L ) and used SS hardware to attach it.

    You can see how i mounted it to the bottom one on the floor, i did basically the same on the top.

    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >

    https://vimeo.com/59208513?from=outro-local

  4. #44
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    854

    Default

    question for this old thread..

    Any issues with galvanic corrosion with the aluminum and stainless steel hardware?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-D562BT
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!



  5. #45
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,786

    Default

    Quote Originally Posted by spyder View Post
    question for this old thread..

    Any issues with galvanic corrosion with the aluminum and stainless steel hardware?
    This can only happen with 2 unlike materials. The braces them selves are Aluminum just like the frame for the rear of the boat.

    The stainless screws I have never had an issue in my other applications with corrosion. On this particular application I sold the boat the next year, no issues with it though.

    I would expect you to be fine with these two metals since they are both resistant to corrosion.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >

    https://vimeo.com/59208513?from=outro-local

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •