Page 1 of 8 123 ... LastLast
Results 1 to 10 of 79
  1. #1
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,161

    Default where do you work??

    ok...

    post up pics of your home away from home... something to make monday go by....

    here's my little slice of heaven. spend 45hrs/wk here, but luckily, I have 360,000sqft of warehouse to walk around in.. last check, 5 miles a day of walking...




    the pink wall

    '06 Supra Launch 20SSV-gone but never forgotten

  2. #2
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,023

    Default

    Ok, I'll bite.





    I am in a revitalized old town part of town so to speak. My building is surrounded by neighborhoods with houses as much as 100+ years old and a lot of restoring and renovating has taken place so it's always refreshing to take a walk and just take in the scenery. However, there are some total dumps right next to beautifully restored and authentic old houses. Kinda weird and I'm sure quite frustrating for the homeowners.

    Also work from home on occasion - similar setup except dual 22" wide screens there.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  3. #3
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,239

    Default

    I work in a lab but it's at my place.
    Attached Images Attached Images
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  4. #4
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,629

    Default

    This is my office, notice the RC forklift for the slow times!!

    IMAG0191.jpg
    The view out of the window in front of my desk.

    The view out of my back window.
    Attached Images Attached Images
    Last edited by newty; 10-31-2011 at 01:28 PM.


    PWI as usual...

  5. #5
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,023

    Default

    Isn't it tricky to hide the porn on your screen when your back is to the door?
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  6. #6
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,629

    Default

    Its a lockable door with no windows!LOL I work for the state... Porn isn't an option.


    You guys see the small spots on the lake? Those are all ducks. Prolly 1500 ducks there right now. Pretty nice view for an industrial site.
    Last edited by newty; 10-31-2011 at 01:36 PM.


    PWI as usual...

  7. #7
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,150

    Default

    Schlumberger
    Noble Jim Day

    here is the rig i work on


    here is where we are located


    and here are a couple shots of a work boat along side us that i snapped


    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  8. #8
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,023

    Default

    Dang RD - how do you get out to the rig? Boat? Chopper? How long does it take? Not a lot of commuting options there...
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  9. #9
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,019

    Default

    I work at the Ronlar Acres site of Intel in Hillsborrow Oregon.

    Pic 1 is showing you all the construction as Intel is building its new Fab D1X as you might know in the news. Lower Center of picture is my building CUB3. My main job is to recieve all the chemicals used by the Fab in processing microchips, recieve all the water from the process also. Then we treat the chemical to make it environmentally safe, contain it to ship off, or in some cases we actually concentrate it to sell off to other companies.
    The building the right with the Yellow is a new building housing a power distrubution system. The building the left has been removed completly. The large construction top center is the new Fab D1X.
    The long building on the fare left of the picture is the main Fab in production D1D. Pretty much any Tank, or pipping you see is chemical based and my responcibility.



    In this picture is a side view. To keep your bearing on what your looking at look for the Yellow Building its the same one as the 1st picture on the right of my main building.


    This picture is a front view of the new Fab and a good picture of the BAC < Big Ass Criane> as they call it. This thing is undescribally huge Took about 6 weeks to build it on sight and its 1 of 5 and they claim its the largest mobile craine in the world. It cost 5M for Intel to rent it. They used it to pick up the steel structures that are right in front of it. Those are 1/2 the entire length of the fab building as you can see several installed on the roof. They are the supperting structucture for the roof of the fab.


    This is a fare back arial shot of the campus. If you follow the outside road its 3.2 miles, i often walk this route at night when im bored lol.
    Last edited by mmandley; 10-31-2011 at 02:59 PM.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  10. #10
    Join Date
    Aug 2006
    Location
    Baton Rouge, LA / Big Bay Lake, MS
    Posts
    2,246

    Default


    I'm on a plane right now and have no I side the office pics, but this is outside doing some product testing
    Brad

    Mississippi/Louisiana
    2011 Launch 21V
    2006 Moomba Mobius LSV sold
    2004 Outback sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •