Like my trailer mover?
I don't have any issues with power/torque of the motors, but I do with traction.
I have a single axle so the tongue weight is heavier. I get stuck easily when trying to move around on dirt/grass or inclines more than 1-2 inches. The wheels on the mover spin. So either I need more weight on the mover or larger tires. Usually end up tearing up the grass and digging a hole...
I use them mover all the time to get the boat from the alley into the garage and lined up, so I can then push it out the rear garage door into the yard. I put the mover in neutral and push the boat by hand as fast as I can. This give me some momentum(yes, it's terrifying) to get onto the grass. Then I use my truck to back it up further if needed....
Results 31 to 34 of 34
04-12-2013, 03:44 PM #31Senior Member
2002 Moomba Mobius LSV - Sold
- Join Date
- Aug 2011
2006 Moomba Mobius LSV
04-12-2013, 05:23 PM #32
Trailer Valet Dolly/Jack Anyone seen of of these in action?
I have found that I can manually move the boat trailer by rolling the tire of the trailer by hand. It moves really easily on a flat surface. Moving in varying directions is not as easy with the dual axle.
I can't really move it forward or backward by pushing from the front or back. Hand rolling the tire is no sweat. Just have some wheel chocks ready to stop the rolling...2010 Moomba XLV
Gravity 3, wake plate
I have a love for ballast and large wakes.
1100 v-drive lockers
1180 under the playpen
+ lead and a collection of other ballast bags
04-12-2013, 06:40 PM #33
My front jack will be going through the grass, then into the gravel though - doesn't really want to cooperate and I do need to make a turn to fit into my parking spot. Need something with a little power for that. Toying with a hidden front hitch on the truck. But what a pain...At the time it seemed like a good idea...
09-11-2013, 05:18 PM #34Junior Member
- Join Date
- Aug 2013
Forgive me for reviving an old thread, but I've just joined the forum. I'm here as a Trailer Valet rep and would be more than happy to answer any and all questions on how to operate our product and its capabilities.