Push Button Start

[sandm]

the thing I've always thought about with a key in a boat... where are they going to go???

[New Guy]

I'm thinking of doing this but adding 2nd a key switch hidden that will be on most of the time except at the sand bar ect. I have a younger nephew that likes to pretend he is driving. This secondary switch should eliminate accidental starting.

It would look like this: key-> IGN Switch & Push button that way you could remove the key essentially disabling the system.

[maxpower220]

http://www.wakeblaster.com/products/Push-Button-Starter

Saw this on the MC forum. Several people of there are using this with good results. For $89, it may be something people here are interested in.

I personally know nothing about this product.

[KG's Supra24]

Interesting, sounds like someone put a kit together.

Here is MC thread
http://www.mastercraft.com/teamtalk/...t=52293&page=4

"I'll run the sale through 1/21. Non-promo price is $110."

[E4NASH]

May do this after ballast project. One project at a time...


Sent from my iPhone using Tapatalk

[moombadaze]

May do this after ballast project. One project at a time...

You need at least 2-3 at the same time

[E4NASH]

You need at least 2-3 at the same time

Well then I should be good...Ballast upgrade, swivel seat (again!), push button start, and plasti-dip.


Sent from my iPhone using Tapatalk

[moombadaze]

[QUOTE=E4NASH;206114 swivel seat (again!)[/QUOTE]

remod's dont count, sounds like you need to add some transom lights

[E4NASH]

remod's dont count, sounds like you need to add some transom lights

Well the swivel never really stuck because the swivel was really shakey so I need to find a new one. I took the swivel out about 5 minutes after it was installed. So, it doesn't meet remod qualifications. Transom lights...yeah I forgot to include those too. That is on my list but is probably sitting at the bottom because after adding all of this weight I will probably need to scoop up a new prop.

[moombadaze]

. That is on my list but is probably sitting at the bottom because after adding all of this weight I will probably need to scoop up a new prop.

if your going to run heavy surf ballast, move the prop upgrade to the top of the list, personally I'd get a Acme, think its a 1235 or something like that but give the guys at acme a call and see what they say