I've been wanting to do this since the day we got the boat, and finally got around to it. The pictures pretty much speak for themselves. Man, I am soooo glad this is done. I hated having it mounted on top of the deck.
Old vs New
Results 1 to 10 of 16
Thread: Flush mounted the transom remote
02-27-2012, 10:02 AM #1
Flush mounted the transom remote06 Supra 24 Gravity Games
02-27-2012, 10:05 AM #2
That's a big hole!
This whole project took 20 minutes start to finish. I used my jigsaw with a bimetal blade and it cut through with ease. I Had ash on the inside of the locker with the shopvac catching the dust. Remote and bezel dropped in the hole and tightend up like a glove!06 Supra 24 Gravity Games
02-27-2012, 10:09 AM #3
Hope Ash had a mask on so she wasn't breathing in fiberglass dust. That stuff is nasty.Drew
New ride: 2012 Mojo
Old ride: 2008 OBV
02-27-2012, 10:33 AM #4
If by mask you mean "cover your face and close your eyes babe" then yeah, she nailed it.06 Supra 24 Gravity Games
02-27-2012, 11:59 AM #5
You got more guts then me cutting a hole like that.Patrick
'08 Mobius LS. 4 Blade OJ 13x13 Prop.
Kenwood KMR440U & RC107MR, T600-2 Rockford Fosgate powering 2 Liquid Acoustics 8" HLCD, Kicker SKM10 subwoofer
5 light- light bar.
Live life today!
02-27-2012, 12:09 PM #6
I hope it lasts a long time and they never change the size and shape of them if it doesn't. Cuz it looks great.My Mom said I'm not allowed to get wet!
2000 Outback LS (sold)
02-27-2012, 12:14 PM #7
That tooks some balls! No way I would have tackeled that. I was soo nervouse when I drilled the hole for the transom light and it was only 1/2".-2012 Supra 21v
Wetsounds Rev10's, Wetsounds SYN 4, Wetsounds XS-12, Alpine MRP-M500,
JL Audio JX360/4, Polk MM651 Interiors
-2008 Mobius LSV
02-27-2012, 12:23 PM #8
Dusty I am doing that with my Kenwood 107mr remote soon. The jigsaw didn't leave a rough finish in the gel?-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
02-27-2012, 01:11 PM #9
It cut right through it. The blade didn't want to make the curve on the bottom left, so it looks a bit jagged. But overall, it left a very clean cut.
Kane-I have the original as backup!06 Supra 24 Gravity Games
02-27-2012, 01:14 PM #10
The 107mr replaced the commander remote and it is a different shape. I thought about flush mounting my 107r and then decided against it. Being that it has an electronics display I was not sure of the life span of this item being on the back of the boat. It is marine and should last but you know how that is.