Results 1 to 10 of 18

Hybrid View

  1. #1
    Join Date
    Aug 2009
    Location
    Oklahoma
    Posts
    10

    Default Engine Problems PLEASE HELP!!!

    Ok so I have a 2004 Moomba Mobius LS. I went to run my boat the other day and it started filling with water I figured maybe I didnt tighten my engine plugs so I pulled my boat back out of the water and checked all the engine plugs they were tight all hoses were hooked up. Boat never over heated. I started the boat with it attached to the trailer and noticed that water is coming out of the block from a hole that looks like it should have a plug in it. I pulled the oil dip stick and found what appears to be water in the oil. I am wondering if there are freeze plugs on the boat and if that could be the issue. I usually winterize my own boat and have never had any issues. I didnt FOG the motor this year but I did insure all the water was out of the block. I know it could be a cracked block or head gasket. what about exhaust manifold or riser? any help on where to start would be great.

    Thanks in advance
    Skib

  2. #2
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,230

    Default

    Can you take a pic of the hole the water is coming out of? You sure there is water in the oil?

  3. #3
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,214

    Default

    Man this does not sound good. Best of luck trouble shooting this issue, hope it's something simple to fix. Fingers crossed


    Sent from my iPhone using Tapatalk
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  4. #4
    Join Date
    Mar 2005
    Location
    t-town
    Posts
    713

    Default

    where are you at in oklahoma? might be able to take a look for you.

  5. #5
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,214

    Default

    Any update on this?
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  6. #6
    Join Date
    Aug 2009
    Location
    Oklahoma
    Posts
    10

    Default

    Im in OKC stationed at Tinker. I will take a pic and post tom.

    Thanks for the responses
    Skib

  7. #7
    Join Date
    Aug 2009
    Location
    Oklahoma
    Posts
    10

    Default Here are the pics

    Ok here are the pics. the water is comimn out right above the freeze plug in that threaded hole? the hole looks clean like somthing used to be in it. Any ideas
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •