Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    Join Date
    Jul 2009
    Location
    Fort Worth, TX
    Posts
    1,027

    Default

    The Kicker requires 8ga power and ground wires, the Rockford requires 4ga. Not sure what size power wire you would want to use from the battery/battery switch but I would think 2ga is big enough.. Something like this should get the job done. http://www.sonicelectronix.com/item_...er-SHD820.html
    -2012 Supra 21v
    Wetsounds Rev10's, Wetsounds SYN 4, Wetsounds XS-12, Alpine MRP-M500,
    JL Audio JX360/4, Polk MM651 Interiors
    -2008 Mobius LSV

  2. #22
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    840

    Default

    Quote Originally Posted by Cigars n scotch View Post
    Ah, I have two.

    Kicker zx200.4
    Rockford Fosgate p500-2
    CnS,

    How many speakers do you have on the zx200.4 and is the p500/2?

    Also, what is the distance from the battery to where you intend to mount a distro block?

    Depending on a couple of factors, you have some options. You have trunk line and a main point of circuit protection right off the battery, then use a pair of non-fused blocks close to the amps to split off. Or, come right off the battery with a fused distrobution block, like what is linked above, the use a single non-fused block on the GND side. Or, use a fused/GND combo block.

  3. #23
    Join Date
    Mar 2012
    Location
    South Carolina
    Posts
    787

    Default

    Thanks. It says it requires 2 midi style fuses. What amperage do I get? I have 100amp fuses on the RF AMP.
    2008 Supra 21V
    2,600 lbs., Gravity III
    Z5 Cargo Rack
    Stereo: Pair of Wetsounds Pro 80's, Rockford Fosgate P500-2, Kicker ZX200.4, Exile ZLD, stock Kicker in-cabins, stock Kenwood HU
    Tow rig: 2008 Slate Tundra, Bilstein 5100's (F&R), 295/65/18 wrapped in Duratracs

  4. #24
    Join Date
    Mar 2012
    Location
    South Carolina
    Posts
    787

    Default

    Goodness MLA, you're speaking Chinese to me!

    On the kicker I have 6 in cabins, and for the Rockford I have 2 WS Pro80s.

    The battery is no more than a foot away.

    Here's a picture of my observers seat compartment where everything is. The inside wall to the right of the battery is where the switch and distro block would go

    ImageUploadedByTapatalk1335379758.415632.jpg
    2008 Supra 21V
    2,600 lbs., Gravity III
    Z5 Cargo Rack
    Stereo: Pair of Wetsounds Pro 80's, Rockford Fosgate P500-2, Kicker ZX200.4, Exile ZLD, stock Kicker in-cabins, stock Kenwood HU
    Tow rig: 2008 Slate Tundra, Bilstein 5100's (F&R), 295/65/18 wrapped in Duratracs

  5. #25
    Join Date
    Jul 2009
    Location
    Fort Worth, TX
    Posts
    1,027

    Default

    I believe you would get whatever size fuse the amplifier requires. That information should be in the manual for the amp.
    Last edited by bzubke1; 04-25-2012 at 03:56 PM.
    -2012 Supra 21v
    Wetsounds Rev10's, Wetsounds SYN 4, Wetsounds XS-12, Alpine MRP-M500,
    JL Audio JX360/4, Polk MM651 Interiors
    -2008 Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •